Skip to main content

Combined traffic management and physical measures reduce noise

New research in Spain that explored solutions to reducing traffic noise suggests that the best option is to combine global measures, such as speed restrictions, and local measures, such as noise screens.
May 3, 2012 Read time: 3 mins
New research in Spain that explored solutions to reducing traffic noise suggests that the best option is to combine global measures, such as speed restrictions, and local measures, such as noise screens.

In 2000, it was estimated that more than 44 per cent of European citizens (or about 210 million people) were exposed to road traffic noise levels that exceeded 55 decibels (dB). Excessive noise can be detrimental to health with effects on sleep, mental health and physical performance. The study is based on a noise-mapping project for the entire city of Palma de Mallorca. The noise maps were created with a model (CadnaA) that used geographic data on traffic, weather and populations. Using the maps, the study analysed possible noise mitigation solutions.

The noise maps revealed that the highest noise levels were near main roads and the highway. Nearly the whole population is exposed to noise levels of more than 55 dB (weighted day-night noise level LDen) and 50 dB during the night (LNight).

Based on traffic composition, the study divided the city into two parts, the city centre and the highway, and proposed four possible noise mitigation solutions:

  •  A 50% reduction of heavy vehicles (HVs) in the city centre and a speed reduction from 90 to 70 km/hour on the highway.
  • A 50% reduction of all vehicles in the city centre and a speed reduction on the highway to 60 km/hour for HVs and to 70 km/hour for light vehicles.
  • A 75% reduction of HVs and a 50% reduction of light vehicles in the city centre and on the highway, and a speed reduction to 60 km/hour for HVs and to 70 km/hour for light vehicles.
  • The use of local measures, such as tunnels and noise barriers, on the highway.

Using the noise maps and modelling techniques the study compared the impacts of these four scenarios. All solutions were found to reduce the number of people exposed to the highest noise levels. Both global traffic management measures and local physical measures, such as barriers, reduce the number of inhabitants exposed to noise levels above 65 dB, but it is a combination that yields the best results with a 31% reduction in the population exposed to levels exceeding 65 dB.

Scenario 2, which uses traffic management techniques, is the most cost-effective over one year. However, after two years it is the solution that combines global and local measures (Scenario 3) that is the most cost-effective, producing benefits worth €2,821,076 per year with total initial construction costs of €2,221,560. Scenario 3 also offers the highest noise level reduction, with levels reduced by up to 5dB (as opposed to 3-4 dB in Scenario 2).

The study noted that some noise measures can interfere with other objectives, such as road safety, energy consumption and congestion. This must be considered when developing mitigation plans by involving stakeholders from other policy sectors, such as transport planning, road maintenance and air quality.

Related Content

  • Driver feedback signs cut speeding
    March 2, 2012
    Technology from 3M is helping reduce the incidence of speeding in the UK city of Salford. A series of Driver Feedback Signs from 3M, DFS 700 units, have been installed in the area to gather both information on average vehicle speeds and encourage drivers to observe the speed limits. The Urban Vision partnership between Salford City Council and Capita Symonds manages the local highways on behalf of the council and has installed 50 of the DFS 700 units in strategic locations close to schools, the entrances to
  • European transport pricing deadline
    September 3, 2012
    Public consultation is nearing completion on the sensitive issue of internalising external costs to make transport users pay for the perceived negative effects they inflict on society, including air pollution, CO2 emissions, accidents and congestion. Within six months a universal model will be unveiled by the European Commission (EC).
  • Lighting innovations boosting brightness, cutting costs
    January 27, 2014
    CU Phosco’s new P850 LED main road lantern has just seen its first major deployment – between Junctions 16 and 17 of the A55, a strategic road which skirts the North Wales coastline – Jason Barnes reports The A55 is a grade-separated dual carriageway also known as the North Wales Expressway. Some 139km long, it originally ran from Chester to Bangor but was extended across the Isle of Anglesey into Holyhead Docks in 2001 under a project part-funded by the European Union.
  • PPRS: the positive side of structural failures
    March 27, 2018
    You learn from your failures, not your successes. That was the overall message for delegates during the day-two morning session on the impact of engineering structural failures. These lessons are also too often “painful”, said Anne-Marie Leclerq, deputy minister for infrastructure within the ministry of transport for the Canadian province of Quebec. On September 30, 2006, a span of the six-lane Concorde Bridge in Laval, near Montreal, collapsed crushing to death five people and injuring six. Only recently