Bonfiglioli is launching heavy duty drives for large machines
Bonfiglioli Trasmital has developed a new series of travel drive gearboxes for use in large, heavy duty tracked machines. The firm is now offering three new product sizes, the 722C, 724C and 726C, which extend its range of tracked travel drives. The 722C develops a maximum torque of up to 330,000Nm, making it suitable for use on excavators of 120-150tonnes, as well as cranes and drilling rigs of 180-230tonnes. The 724C develops a maximum torque of up to 450,000Nm, and is specially designed for large cranes
March 8, 2013
Read time: 1 min
Bonfiglioli develops new series of travel drives
5073 Bonfiglioli Trasmital has developed a new series of travel drive gearboxes for use in large, heavy duty tracked machines. The firm is now offering three new product sizes, the 722C, 724C and 726C, which extend its range of tracked travel drives. The 722C develops a maximum torque of up to 330,000Nm, making it suitable for use on excavators of 120-150tonnes, as well as cranes and drilling rigs of 180-230tonnes. The 724C develops a maximum torque of up to 450,000Nm, and is specially designed for large cranes and drilling rigs of up to 300tonnes. Finally, the 726C transmits a maximum torque of up to 625,000Nm, for use in excavators of up to 350tonnes and cranes and drilling rigs of up to 400tonnes.
AFW350 and AFT350 are the latest medium-sized asphalt pavers from Ammann and are said to offer good manoeuvrability in confined areas. The hydrostatically driven machines offer a paving width from 1.8-3.5metres and the output potential of up to 230tonnes/hour. A wide range of optional equipment is available to improve paver performance. These include a vibratory screed or a tamping/vibratory screed that can be heated with either gas or electricity, and automatic lighting and temperature control functions.
Getech, the Italian manufacturer of centrifugal washwater cleaning systems (formerly Gennaretti) is targeting tunnelling operations with containerised versions of its V type machines. The five-machine range can remove up to 60tonnes an hour of solids from washwater flows of up to 180m3/hr.
Getech, the Italian manufacturer of centrifugal washwater cleaning systems (formerly Gennaretti) is targeting tunnelling operations with containerised versions of its V type machines. The five-machine range can remove up to 60tonnes an hour of solids from washwater flows of up to 180m3/hr.
ZF used bauma 2013 to show the next stage of development for its cPower continuously variable transmission (CVT). By combining the transmission with a hybrid module, ZF said greater operating efficiencies were available from the integration of start/stop technology and energy recovery from regenerative braking. Potentially, the hybrid drive system has the ability to boost fuel efficiency by up to 25% in addition to the 20% higher operating efficiency already offered by the cPower transmission, said ZF.
