Bid to solve pothole problem

The UK now has new guidance designed to ensure that when utilities companies dig up the road surface, they leave proper repairs once the work is complete. It is estimated that poorly replaced road surfaces mean there are around 90,000 remedial works each year, adding inconvenience to motorists and cyclists. Many of the road repairs are not properly carried out, increasing the risk of potholes forming and further defects. This significantly increases the risk of accidents and of damage to vehicles. The new l
July 3, 2012 Read time: 2 mins
Road repairs not properly carried out increase the risk of potholes forming. This pothole, showing exposed wires to the traffic lights, is on a busy London road
The UK now has new guidance designed to ensure that when utilities companies dig up the road surface, they leave proper repairs once the work is complete.

It is estimated that poorly replaced road surfaces mean there are around 90,000 remedial works each year, adding inconvenience to motorists and cyclists.

Many of the road repairs are not properly carried out, increasing the risk of potholes forming and further defects. This significantly increases the risk of accidents and of damage to vehicles.

The new legislation is intended to reduce the chances of potholes developing as well as cutting down the risk that the road will have to be replaced a second time.

The UK government has set out a package of measures over the last nine months to reduce disruption caused by road works. These include proposals to increase the charges for companies whose works overrun by a factor of ten, as well as to improve signage and protection of sites and for a tougher street works inspection regime. In addition, the 5432 Department for Transport has introduced more rigorous testing and training for those who dig up the road as well as approving the first two street works permit schemes to help councils coordinate and manage works on their roads.

For more information on companies in this article

Related Content

  • ECT's sustainability in action
    February 7, 2012
    French company ECT (Enviro Conseil Travaux) has opted to take advantage of the Caterpillar Certified Power Train (CPT) rebuild service for two of its Cat 740 Ejector articulated trucks. These are the first rebuilds worldwide for articulated trucks, and both were carried out by the French Cat dealer Bergerat Monnoyeur. What you get with CPT: Restores power train to like-new performance, Covers radiator, engine, transmission, torque converter, final drive and axle, Approximately 200 tests and inspections of p
    Read More
  • Utility spec for JCB's 8018
    February 15, 2012
    A range of safety specific additions have been made to JCB's 8018 mini excavator after the company worked with leading utility contractors to develop a special industry-specific version of the machine. The largest of the three 801 minis, the 1.6tonne machine retains its digging capabilities and its powerful 14.2kW Tier III compliant motor, but the utility pack offers requested upgrades. For example, to prevent damage on site, the lower door window has been replaced by a steel panel and the rear counterweigh
    Read More
  • Weigh in motion systems aid overweight vehicle detection
    July 12, 2012
    Modern weighing equipment helps road operators tackle the costly business of road damage caused by overloaded trucks as Patrick Smith reports. Overloading of commercial vehicles has a major impact on the life expectancy of road networks. The cost of premature road failure and repairs is a major burden on many governments particularly in developing countries where this problem diverts vital funding that could otherwise be spent on health and education.
    Read More
  • Yotta and PiP IoT improve safety on Auckland motorways
    February 25, 2020
    In New Zealand, Auckland System Management is working with asset software provider Yotta and sensor manufacturer PiP IoT to manage motorway maintenance and repairs.
    Read More

Highlighted Content