Skip to main content

AUSA’s rigid telehandler gets traction control and rear-steer axle

Barcelona-based Ausa will use Bauma to reveal its new T 144 H Plus ultra-compact telehandlers, which the manufacturer claims is the most powerful for its size in the world. Equipped with a host of new technology from development partner Bosch Rexroth, the T 144 H is the first rigid telehandler with high-efficiency traction control and a steering rear axle, according to the company. The machine will use less fuel and generate less noise and heat than its predecessors as well. Also on show will be the new Aus
April 9, 2013 Read time: 2 mins
Ausa’s T 144 H is the first rigid telehandler with traction control and a steering rear axle
Barcelona-based 2188 Ausa will use 688 Bauma to reveal its new T 144 H Plus ultra-compact telehandlers, which the manufacturer claims is the most powerful for its size in the world. Equipped with a host of new technology from development partner 2253 Bosch Rexroth, the T 144 H is the first rigid telehandler with high-efficiency traction control and a steering rear axle, according to the company. The machine will use less fuel and generate less noise and heat than its predecessors as well.

Also on show will be the new Ausa B200 4x4x4 sweeper, washer and snow clearer. The manufacturer will be highlighting these 3 very different implements for the B200 and the way in which they can be used and changed at speed. Different tools will allow the machine to operate 365 days a year for a very low investment. A VW engine, electronics and hydraulics by Bosch-Rexroth and the smallest turning radius in the market are also going to be key competitive advantages for the B200. The unit allows the unit to shed its 3 demountable bodies quickly, and all can be stored separately on their own legs.

Other innovations on the Ausa stand include an the exclusive fork positioner with integrated side shift as well as an electrohydraulic weighing system of the load that increases the quality and reduces the manufacturing costs for the X 1100 RH concrete mixer.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 48357 0 oLinkExternal www.Ausa.com www.Ausa.com false /EasySiteWeb/GatewayLink.aspx?alId=48357 false false%>

For more information on companies in this article

Related Content

  • Cat adds more K-series wheeled loaders at INTERMAT
    January 6, 2017
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
  • Cat adds more K-series wheeled loaders at INTERMAT
    April 20, 2012
    Cat has added three new models of wheeled loader to its range, badged 924K, 930K and 938K. All share the same basic architecture, differing in wheelbase, axles, machine width and bucket capacities – the latter extend from 1.9-5.0 cubic metres. The biggest change over the H-series models they replace is an all-new cab, offering a massive improvement in ergonomics and comfort. A wider, deeper front windscreen, climate control, seat-mounted joysticks and an ultra-low in-cab noise level of 66dB(a) are among i
  • Liebherr 150EC-B is latest flat-top crane
    January 6, 2017
    Liebherr will show a modular design flat-top tower crane in the 150EC-B at this year’s Bauma. The 150EC-B is available in FR.tronic, with traditional contractor controls, or Litronic version with programmable logic controls. The flat-top crane can be had in 6 tonne and 8 tonne versions, with a maximum hook height of 63m and maximum working radius of 60m. Lift capacity at full radius is 1,700kg.
  • Liebherr 150EC-B is latest flat-top crane
    February 7, 2013
    Liebherr will show a modular design flat-top tower crane in the 150EC-B at this year’s Bauma. The 150EC-B is available in FR.tronic, with traditional contractor controls, or Litronic version with programmable logic controls. The flat-top crane can be had in 6 tonne and 8 tonne versions, with a maximum hook height of 63m and maximum working radius of 60m. Lift capacity at full radius is 1,700kg.