Skip to main content

AUSA’s rigid telehandler gets traction control and rear-steer axle

Barcelona-based Ausa will use Bauma to reveal its new T 144 H Plus ultra-compact telehandlers, which the manufacturer claims is the most powerful for its size in the world. Equipped with a host of new technology from development partner Bosch Rexroth, the T 144 H is the first rigid telehandler with high-efficiency traction control and a steering rear axle, according to the company. The machine will use less fuel and generate less noise and heat than its predecessors as well. Also on show will be the new Aus
April 9, 2013 Read time: 2 mins
Ausa’s T 144 H is the first rigid telehandler with traction control and a steering rear axle
Barcelona-based 2188 Ausa will use 688 Bauma to reveal its new T 144 H Plus ultra-compact telehandlers, which the manufacturer claims is the most powerful for its size in the world. Equipped with a host of new technology from development partner 2253 Bosch Rexroth, the T 144 H is the first rigid telehandler with high-efficiency traction control and a steering rear axle, according to the company. The machine will use less fuel and generate less noise and heat than its predecessors as well.

Also on show will be the new Ausa B200 4x4x4 sweeper, washer and snow clearer. The manufacturer will be highlighting these 3 very different implements for the B200 and the way in which they can be used and changed at speed. Different tools will allow the machine to operate 365 days a year for a very low investment. A VW engine, electronics and hydraulics by Bosch-Rexroth and the smallest turning radius in the market are also going to be key competitive advantages for the B200. The unit allows the unit to shed its 3 demountable bodies quickly, and all can be stored separately on their own legs.

Other innovations on the Ausa stand include an the exclusive fork positioner with integrated side shift as well as an electrohydraulic weighing system of the load that increases the quality and reduces the manufacturing costs for the X 1100 RH concrete mixer.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 48357 0 oLinkExternal www.Ausa.com www.Ausa.com false /EasySiteWeb/GatewayLink.aspx?alId=48357 false false%>

For more information on companies in this article

Related Content

  • Dana Rexroth will launch the high-efficiency R2 hydromechanical variable transmission for smaller machines
    February 7, 2013
    Dana Rexroth Transmission Systems, the joint venture Dana and Bosch Rexroth, is to launch the R2 hydromechanical variable transmission (HVT). The modular transmission uses both a hydrostatic drive and a mechanical gearbox to deliver fuel savings of up to 25% compared to a torque converter transmission. Designed to work with engine outputs of 134-193kW (180-260hp), the R2 is suitable for use in wheeled loaders, motor graders, lift trucks and a variety of off-highway applications. The hydrostatic drive unit
  • Komatsu is upgrading its well-proven HD785 rigid truck
    February 12, 2013
    Higher performance is claimed for Komatsu’s Dash 7 version of its well-proven HD785 rigid dump truck, which offers a heaped capacity of 60m3. The 91tonne capacity HD785-7 is matched to Komatsu’s PC1250 and PC2000 excavators, and WA800 and WA900 wheel loaders. The new version of the truck is said to be more powerful than the previous generation machine, with drive from a Komatsu SAA12V140E-3 diesel delivering 1,178kW.
  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    January 6, 2017
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    March 27, 2013
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which