Skip to main content

AUSA’s rigid telehandler gets traction control and rear-steer axle

Barcelona-based Ausa will use Bauma to reveal its new T 144 H Plus ultra-compact telehandlers, which the manufacturer claims is the most powerful for its size in the world. Equipped with a host of new technology from development partner Bosch Rexroth, the T 144 H is the first rigid telehandler with high-efficiency traction control and a steering rear axle, according to the company. The machine will use less fuel and generate less noise and heat than its predecessors as well. Also on show will be the new Aus
April 9, 2013 Read time: 2 mins
Ausa’s T 144 H is the first rigid telehandler with traction control and a steering rear axle
Barcelona-based 2188 Ausa will use 688 Bauma to reveal its new T 144 H Plus ultra-compact telehandlers, which the manufacturer claims is the most powerful for its size in the world. Equipped with a host of new technology from development partner 2253 Bosch Rexroth, the T 144 H is the first rigid telehandler with high-efficiency traction control and a steering rear axle, according to the company. The machine will use less fuel and generate less noise and heat than its predecessors as well.

Also on show will be the new Ausa B200 4x4x4 sweeper, washer and snow clearer. The manufacturer will be highlighting these 3 very different implements for the B200 and the way in which they can be used and changed at speed. Different tools will allow the machine to operate 365 days a year for a very low investment. A VW engine, electronics and hydraulics by Bosch-Rexroth and the smallest turning radius in the market are also going to be key competitive advantages for the B200. The unit allows the unit to shed its 3 demountable bodies quickly, and all can be stored separately on their own legs.

Other innovations on the Ausa stand include an the exclusive fork positioner with integrated side shift as well as an electrohydraulic weighing system of the load that increases the quality and reduces the manufacturing costs for the X 1100 RH concrete mixer.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 48357 0 oLinkExternal www.Ausa.com www.Ausa.com false /EasySiteWeb/GatewayLink.aspx?alId=48357 false false%>

For more information on companies in this article

Related Content

  • XCMG unveils new ADT design
    November 26, 2012
    XCMG has unveiled a novel ADT design at bauma China, the DAE60. This machine features all-wheel-drive and uses a single axle at the rear, with gear drive casings that can rotate about the ends of this axles and dual wheels for each casing. The design is said to allow good all terrain capability as the wheels can cope with very uneven ground, without losing traction. The machine has a cooling pack to the rear of the cab, with a wide but low, sloping engine cover at the front to ensure forward visibility.
  • Goldhofer rescues O&K RH 120-E from Calenturitas de Prodeco Mine
    November 1, 2016
    It was reportedly a logistical challenge to collect a massive front shovel excavator from the open pit coal mine Calenturitas de Prodeco in north-eastern Colombia. The twin engines of the 290-tonne O&K RH 120-E mining excavator had given up the ghost and could not be repaired on site, leaving the monster stranded atop a high mound of earth. So the mining company contracted heavy haulage specialist Boom Logistics to collect the excavator and transport it to the repair shop 22km away. http://www.goldho
  • New low emission, versatile asphalt plant from Marini
    February 11, 2013
    Marini’s new eTOWER asphalt plants are said to complete the firm’s Top Tower line-up. The existing Top Tower plants offer capacities of 280-400tonnes/hour and the eTOWER machines are designed with output of 150 and 180tonnes/hour. The units benefits from features used in the Top Tower range such as the drying/filtering tower system. This features as innovative location for the filter and under-filter hopper, above the dryer drum, which is said to help reduce energy consumption. This modular plant can be sup
  • Manitou unveils three new telehandlers at bauma
    January 6, 2017
    Manitou exclusively revealed three new models of fixed telehandler at bauma 2013 – the MT 835, MT 1135 and MT 1335 – with lifting heights of 7.75m, 11.05m and 12.55m respectively. “This series is aimed at the rental market,” said Manitou spokesperson Damien Cocton. “The design of the three models is the same, which helps with the maintenance of the machines. It also helps the operators.” All have identical chassis, boom, engine, transmission and hydraulics. Designed with the construction sector in mind for