Skip to main content

Atlas Weyhausen’s little AR 30 can work the smallest spaces

With a standard bucket capacity of 0.32m³ and a width of 1.25m, Atlas Weyhausen’s new AR 30 wheeled loader has been designed for tasks where the workspace is limited, such as road maintenance and restricted construction sites.
April 18, 2013 Read time: 1 min
Just 1.25m wide and with a bucket capacity of 0.32 m³, the AR 30 has been designed with tasks such as road maintenance in mind.
With a standard bucket capacity of 0.32m³ and a width of 1.25m, 162 Atlas Weyhausen’s new AR 30 wheeled loader has been designed for tasks where the workspace is limited, such as road maintenance and restricted construction sites.

The 2150kg-loader has a 299 Perkins Diesel engine with an output of 24.6kW @ 2,800rpm, which means that the new exhaust regulations COM IIIB will not apply to it. It can take a standard payload of 697kg on its pallet fork.

Some of the features highlighted by the company are a foldable roll bar and falling object protection system (FOPS) roof on the cabin; an improved ergonomic design for the driver’s seat; and an adjustable steering column.

The AR 30 has an ‘extra inching pedal’, which allows sensitive sharing of thrust and lifting forces and leads to less wear and fuel consumption, says Atlas Weyhausen. And its robust centre pivot provides a low centre of gravity and good off-road traction.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12771 0 oLinkExternal www.atlas-weycor.de www.atlas-weycor.de false /EasySiteWeb/GatewayLink.aspx?alId=12771 false false%>

For more information on companies in this article

Related Content

  • L506C and L508C wheeled loaders join Liebherr’s compact line-up
    January 6, 2017
    Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket. Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinde
  • L506C and L508C wheeled loaders join Liebherr’s compact line-up
    February 8, 2013
    Liebherr’s compact L506C and L508C wheeled loaders both have a very low overall height, aiding stability and versatility when working in congested site conditions. Weighing 5,180kg and 5,600kg respectively the two loaders offer tipping loads of 3,450kg and 3,850kg. The L506C is powered by a 45kW (61hp) engine and comes with a 0.8m3 bucket, while the L508C uses a 49kW (67hp) motor and a 1.0m3 bucket. Both machines have a comfortable cab with plenty of glass, for good all-round visibility. The lifting cylinde
  • LiuGong’s 375B skid steer features curved design
    March 6, 2014
    The curved design of LiuGong’s new 375B skid steer loader improves sight lines and makes the machine stand out. The curves also provide another, much less obvious benefit. “Intelligent use of complex shapes adds another important benefit – reduced noise levels inside the cab,” the company said. “By using curves to increase the stiffness of the cab, surface transmission of sound energy is reduced.” The 375B also features improved weight distribution that enables better balance, stability and control. The n
  • LiuGong’s 375B skid steer features curved design
    January 6, 2017
    The curved design of LiuGong’s new 375B skid steer loader improves sight lines and makes the machine stand out. The curves also provide another, much less obvious benefit. “Intelligent use of complex shapes adds another important benefit – reduced noise levels inside the cab,” the company said. “By using curves to increase the stiffness of the cab, surface transmission of sound energy is reduced.” The 375B also features improved weight distribution that enables better balance, stability and control. The n