Atlas Weyhausen adds more power to wheeled loaders

Atlas Weyhausen wheel loaders have been given a power boost as part of the developments to meet the latest emission standards. The company is showing two of the new machine types, labelled as ‘e’ models, at the stand of its French business partner Payen. The new ‘e’-type wheel loaders have been designed to provide a significant gain in terms of power and performance. Engine outputs now amount to 70kW for the AR 80e and 85kW for the AR 95e at 2,200rpm, representing a power increase of more than 15% for each.
April 18, 2012 Read time: 1 min
Models including the 80e are on display with latest engine.
162 Atlas Weyhausen wheel loaders have been given a power boost as part of the developments to meet the latest emission standards.

The company is showing two of the new machine types, labelled as ‘e’ models, at the stand of its French business partner Payen.

The new ‘e’-type wheel loaders have been designed to provide a significant gain in terms of power and performance. Engine outputs now amount to 70kW for the AR 80e and 85kW for the AR 95e at 2,200rpm, representing a power increase of more than 15% for each.

The operating weight of the AR 80e has been raised to 6,100kg and there are also gains in both the thrust and the tipping load compared with the previous model.

www.radlader.com

RSS
View more videos

For more information on companies in this article

Related Content

  • INTERMAT visitors first to see new high flow Bobcat telehandler
    April 18, 2012
    Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
    Read More
  • INTERMAT reveal for Hyundai’s 22tonne hybrid excavator
    January 6, 2017
    Hyundai used INTERMAT to show its 22tonne hybrid excavator – the 220LC-9. Designed and developed in-house with electric components from the company’s electronics division, the Hybrid 220LC uses an electric motor for its slew functions, enabling a smaller engine to be fitted.“This combination means we can use a four-cylinder 98kW engine in the hybrid compared to a six-cylinder 118kW engine in the conventional R220LC-9,” explained Hyundai product engineer Joachim Van de Perre.
    Read More
  • INTERMAT reveal for Hyundai’s 22tonne hybrid excavator
    April 17, 2012
    Hyundai used INTERMAT to show its 22tonne hybrid excavator – the 220LC-9. Designed and developed in-house with electric components from the company’s electronics division, the Hybrid 220LC uses an electric motor for its slew functions, enabling a smaller engine to be fitted.“This combination means we can use a four-cylinder 98kW engine in the hybrid compared to a six-cylinder 118kW engine in the conventional R220LC-9,” explained Hyundai product engineer Joachim Van de Perre.
    Read More
  • Allu adds extra durability to D-series screen crusher buckets
    January 6, 2017
    Allu has upgraded its screener crusher buckets with the introduction of the new six-model D-Series range suitable for excavators from 10 to 40tonnes and wheel loaders between five and 30tonnes. The design allows the buckets to be used for crushing demolition waste, asphalt and glass using replaceable hammer heads to produce end product between 25mm and 100mm. They can also be configured to screen materials with product size from 0-15mm, 0-25mm or 0-35mm and can be used for mixing in lime or other products
    Read More

Highlighted Content