Skip to main content

Atlas Copco showcases portable energy pillars

Atlas Copco’s Portable Energy division says its name change from Portable Air has seen the strategy produce innovation across all five pillars of the division: Air (on-site compressors); Power (on-site generators); Light (on-site light towers); Water (on-site pumps) and Used Equipment. “Our five pillar strategy has enabled us to innovate across the board to become a complete solutions provider for the construction industry,” says Norbert Paprocki, president of the Atlas Copco Portable Energy division. “Our
January 6, 2017 Read time: 2 mins
161 Atlas Copco’s Portable Energy division says its name change from Portable Air has seen the strategy produce innovation across all five pillars of the division:  Air (on-site compressors); Power (on-site generators); Light (on-site light towers); Water (on-site pumps) and Used Equipment.

“Our five pillar strategy has enabled us to innovate across the board to become a complete solutions provider for the construction industry,” says Norbert Paprocki, president of the Atlas Copco Portable Energy division. “Our Genset Management solution is just one example of innovation driven by customer needs that we will be demonstrating at 688 Bauma.”

Among other world and European debuts across these pillars will be the European debut of the QLTS solar light towers from the Light Pillar while the Water Pillar will be showing the latest additions to the WEDA pump range for the first time in Europe.

The Air Pillar, compressors, is finalising the last phase of Stage 3B units and has started developing a dedicated series 7 1265 Kubota compressors for the rental industry, while in the Power Pillar, the division’s new Generator Competence Center in Zaragoza, Spain, is currently rolling out a number of value-centred innovations under the motto of Predictable Power.

“At bauma, Atlas Copco will demonstrate the cost advantages of its Genset Management solution. The new Digital AVR (Automatic Voltage Regulator)  technology with the Qc4002 MkII controller reduce the need to oversize equipment in order to meet start-up requirements, which has a significant impact on generator cost, efficiency and lifespan,” says the company.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.AtlasCopco.com www.AtlasCopco.com false http://www.atlascopco.com/ false false%>

For more information on companies in this article

Related Content

  • High performance excavators from LiuGong
    January 6, 2017
    LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
  • High performance excavators from LiuGong
    February 8, 2013
    LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
  • Two new rough terrain cranes and a new MLC165 lattice-boom crawler crane from Manitowoc
    January 6, 2017
    Manitowoc will unwrap two new Grove rough-terrain cranes at Bauma: the RT550E and RT770E, as well as a new lattice-boom crawler crane. The 45tonne capacity RT550E offers the highest and longest boom in its class at 39m and, with a chassis length of just under 12m, a width of 2.55m and an operating weight of 29tonnes, the new machine is a compact crane that can run well within most national European road regulations for heavy machinery says Manitowoc. The RT550E also features the manufacturer’s new crane con
  • Two new rough terrain cranes and a new MLC165 lattice-boom crawler crane from Manitowoc
    February 15, 2013
    Manitowoc will unwrap two new Grove rough-terrain cranes at Bauma: the RT550E and RT770E, as well as a new lattice-boom crawler crane. The 45tonne capacity RT550E offers the highest and longest boom in its class at 39m and, with a chassis length of just under 12m, a width of 2.55m and an operating weight of 29tonnes, the new machine is a compact crane that can run well within most national European road regulations for heavy machinery says Manitowoc. The RT550E also features the manufacturer’s new crane con