Skip to main content

Atlas Copco showcases portable energy pillars

Atlas Copco’s Portable Energy division says its name change from Portable Air has seen the strategy produce innovation across all five pillars of the division: Air (on-site compressors); Power (on-site generators); Light (on-site light towers); Water (on-site pumps) and Used Equipment. “Our five pillar strategy has enabled us to innovate across the board to become a complete solutions provider for the construction industry,” says Norbert Paprocki, president of the Atlas Copco Portable Energy division. “Our
January 6, 2017 Read time: 2 mins
161 Atlas Copco’s Portable Energy division says its name change from Portable Air has seen the strategy produce innovation across all five pillars of the division:  Air (on-site compressors); Power (on-site generators); Light (on-site light towers); Water (on-site pumps) and Used Equipment.

“Our five pillar strategy has enabled us to innovate across the board to become a complete solutions provider for the construction industry,” says Norbert Paprocki, president of the Atlas Copco Portable Energy division. “Our Genset Management solution is just one example of innovation driven by customer needs that we will be demonstrating at 688 Bauma.”

Among other world and European debuts across these pillars will be the European debut of the QLTS solar light towers from the Light Pillar while the Water Pillar will be showing the latest additions to the WEDA pump range for the first time in Europe.

The Air Pillar, compressors, is finalising the last phase of Stage 3B units and has started developing a dedicated series 7 1265 Kubota compressors for the rental industry, while in the Power Pillar, the division’s new Generator Competence Center in Zaragoza, Spain, is currently rolling out a number of value-centred innovations under the motto of Predictable Power.

“At bauma, Atlas Copco will demonstrate the cost advantages of its Genset Management solution. The new Digital AVR (Automatic Voltage Regulator)  technology with the Qc4002 MkII controller reduce the need to oversize equipment in order to meet start-up requirements, which has a significant impact on generator cost, efficiency and lifespan,” says the company.

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.AtlasCopco.com www.AtlasCopco.com false http://www.atlascopco.com/ false false%>

For more information on companies in this article

Related Content

  • Kubota launches a new 8tonne KX080-4 mini excavator and two new 4tonne compact wheeled loaders
    January 6, 2017
    Mini excavator specialist Kubota has developed a new 8tonne KX080-4, which will be on show and CE certified at Bauma. With a tier 4 engine and a completely new cab design, the KX080-4 will join the company’s existing KX-4 series of compact excavators and be at the top end of Kubota’s weight class. There will also be two short tail-swing models on view, the U48-4 and the U55-4 weighing in at 4.7tonnes and 5.4tonnes respectively. Also, look out for two new prototype mini excavators at 4.2tonnes and 4.8 tonnes
  • Kubota launches a new 8tonne KX080-4 mini excavator and two new 4tonne compact wheeled loaders
    February 15, 2013
    Mini excavator specialist Kubota has developed a new 8tonne KX080-4, which will be on show and CE certified at Bauma. With a tier 4 engine and a completely new cab design, the KX080-4 will join the company’s existing KX-4 series of compact excavators and be at the top end of Kubota’s weight class. There will also be two short tail-swing models on view, the U48-4 and the U55-4 weighing in at 4.7tonnes and 5.4tonnes respectively. Also, look out for two new prototype mini excavators at 4.2tonnes and 4.8 tonnes
  • Doka showcases Cut&Cover tunnel construction solution
    January 6, 2017
    Austrian firm Doka will be showcasing at bauma its first system to be specifically designed and optimised for cut-and-cover tunnel construction. With Doka CC (Cut and Cover), different types of traffic tunnel, such as rail or road tunnels, are said to be able to be built quickly, efficiently and safely. Doka says the creation of its innovative tunnel system was made possible only by the use of hi-tech construction materials and products such as the Composite formwork beam I tec 20. The choice of high-grade
  • Doka showcases Cut&Cover tunnel construction solution
    February 7, 2013
    Austrian firm Doka will be showcasing at bauma its first system to be specifically designed and optimised for cut-and-cover tunnel construction. With Doka CC (Cut and Cover), different types of traffic tunnel, such as rail or road tunnels, are said to be able to be built quickly, efficiently and safely. Doka says the creation of its innovative tunnel system was made possible only by the use of hi-tech construction materials and products such as the Composite formwork beam I tec 20. The choice of high-grade