Atlas Copco introduces its Edge Drill Monitor at INTERMAT 2012

Atlas Copco is introducing the Edge Drill Monitor, which is designed to show what is happening at the bottom of the hole during drilling.
January 6, 2017 Read time: 2 mins
Atlas Copco’s Edge Drill Monitor shows the driller what is happening down the hole.

Atlas Copco is introducing the Edge Drill Monitor, which is designed to show what is happening at the bottom of the hole during drilling.

Information about the hammer and the bit is displayed graphically in real time, allowing the operator to optimise the penetration rate of down-the-hole (DTH) drilling, maintain the correct degree of flushing and avoid tool breakage and consequent delays.

Edge, which has been developed jointly by 161 Atlas Copco and SPC Technology, is a device for continuous monitoring that can be fitted to all types of deep-hole drill rigs that use Secoroc DTH hammers.

“By isolating the hammer vibrations from all the other noise and analysing the frequency and amplitude of the drill bit hitting the rock thousands of feet below ground, we are able to provide the drillers with user-friendly real time information to optimize their drilling parameters,” said SPC Technology chief technology officer Ivo Henriksson. “In a recent customer evaluation programme, we reduced fuel cost per drilled footage by 10% and increased rate of penetration by 11% using the Edge.”

A sensor is mounted on the drill head or rotation unit, which is connected by a cable to the data capturing unit mounted on the rig. When the piston in the DTH hammer strikes the bit, it creates vibration which is captured, processed and interpreted, with the data transmitted to the PC. The PC displays this data on its 175mm screen. Any problems or unexpected changes are displayed in the graphical view in real-time with alerts when something out of the ordinary occurs. These spikes can then be interpreted, indicating scenarios such as the sudden presence of a new type of rock.

%$Linker: External 0 0 0 oLinkExternal www.atlascopco.com Atlas Copco false http://www.atlascopco.com/ false false%>

Hall 5B Stand: F 027/ F015

%$Linker: 2 Internal 2 4824 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/intermat-2012/video/ true false%>

For more information on companies in this article

Related Content

  • 4x4 Canter is start turn on Mercedes Benz stand
    April 19, 2012
    A 4x4 version of Mitsubishi’s Canter light truck premiered at INTERMAT on the stand of its sister company Mercedes Benz, which distributes the vehicles in Europe. The 6.5tonne GVW vehicle is fitted with a transfer box that diverts half of the torque to the front wheels at the touch of a button and can be engaged while still on the move.
    Read More
  • Sany unveils SYG 5320 truck-mounted concrete pump
    January 6, 2017
    A truck-mounted concrete pump with five distributor mast arms for the 40m category, the SYG 5320 THB 42 with RZ5 placing boom has low-mounted roll fold and Z-fold. The model’s sturdy self-supporting basic frame has supporting arms at the front which have dual telescoping capability. The support can be swung out hydraulically at the rear and pivoted directly on the basic frame. This manoeuvre transfers the forces from the load torque of the placing boom directly to the rear supports, ensuring stable working
    Read More
  • Sany unveils SYG 5320 truck-mounted concrete pump
    April 12, 2012
    A truck-mounted concrete pump with five distributor mast arms for the 40m category, the SYG 5320 THB 42 with RZ5 placing boom has low-mounted roll fold and Z-fold. The model’s sturdy self-supporting basic frame has supporting arms at the front which have dual telescoping capability. The support can be swung out hydraulically at the rear and pivoted directly on the basic frame. This manoeuvre transfers the forces from the load torque of the placing boom directly to the rear supports, ensuring stable working
    Read More
  • Outset’s Lanx Evo app turns an iPhone into a portable weigh scale display
    January 6, 2017
    Italian firm Outset has extended the functionality of its Lanx Evo on-board truck weighing system with the development of an app for the iOS platform. Called Lanx Evo, the app allows operators to use an iPhone to connect to Outset’s on-board truck scale, enabling the iOS device to show a continuous display of payload. This system is ideal, said the company, for truck drivers who load their own vehicles as the use of an iPhone gives them a portable weigh scale display that can be seen from the cab of the loa
    Read More

Highlighted Content