Allu adds extra durability to D-series screen crusher buckets

Allu has upgraded its screener crusher buckets with the introduction of the new six-model D-Series range suitable for excavators from 10 to 40tonnes and wheel loaders between five and 30tonnes. The design allows the buckets to be used for crushing demolition waste, asphalt and glass using replaceable hammer heads to produce end product between 25mm and 100mm. They can also be configured to screen materials with product size from 0-15mm, 0-25mm or 0-35mm and can be used for mixing in lime or other products
January 6, 2017 Read time: 1 min
Pekka Kiukkonen with Allu’s screen crusher bucket
RSS2180 ALLU has upgraded its screener crusher buckets with the introduction of the new six-model D-Series range suitable for excavators from 10 to 40tonnes and wheel loaders between five and 30tonnes.

The design allows the buckets to be used for crushing demolition waste, asphalt and glass using replaceable hammer heads to produce end product between 25mm and 100mm. They can also be configured to screen materials with product size from 0-15mm, 0-25mm or 0-35mm and can be used for mixing in lime or other products for soil stabilisation purposes.

www.allu.net

Hall: 6 Stand: L019

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Astec show model of relocateable asphalt plant
    January 6, 2017
    Astec has brought along a detailed model of a complete relocateable asphalt plant to explain the key features. The plant incorporates double-barrel technology. A continuous process delivers virgin aggregates or 50% recycled material into the inner drum where it is dried. The aggregate then drops out to the outer drum, where bitumen is injected. Advantages include guaranteed mixing times and being able to heat the material within a single system.
    Read More
  • Astec show model of relocateable asphalt plant
    April 16, 2012
    Astec has brought along a detailed model of a complete relocateable asphalt plant to explain the key features. The plant incorporates double-barrel technology. A continuous process delivers virgin aggregates or 50% recycled material into the inner drum where it is dried. The aggregate then drops out to the outer drum, where bitumen is injected. Advantages include guaranteed mixing times and being able to heat the material within a single system.
    Read More
  • Dana shows HVT R3 at INTERMAT
    January 6, 2017
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More
  • Dana shows HVT R3 at INTERMAT
    April 19, 2012
    Dana Rexroth Transmission Systems’ HVT R3 is the first of a series of hydro-mechanical variable transmissions resulting from the 50-50 joint venture between Dana and Bosch Rexroth AG. The R3 is for wheeled loaders with engine outputs of up to 265kW and uses a combination of hydrostatic and mechanical drives to offer fuel savings of up to 20%. Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the
    Read More

Highlighted Content