AEM sends out warning for diesel fuels

The US Association of Equipment Manufacturers (AEM) is warning equipment users that new, low sulphur fuels feature a greater risk of ignition by static electricity ignition. These ultra-low sulphur diesel (ULSD) fuels are required for use with the latest generation low emission diesel engines designed to meet Tier 4 Interim/Stage IIIB emission requirements. With this in mind, the AEM is now providing a new best practices guidance bulletin. This publication highlights the fact that removing sulphur and other
June 13, 2013 Read time: 2 mins
The US 1100 Association of Equipment Manufacturers (AEM) is warning equipment users that new, low sulphur fuels feature a greater risk of ignition by static electricity ignition. These ultra-low sulphur diesel (ULSD) fuels are required for use with the latest generation low emission diesel engines designed to meet Tier 4 Interim/Stage IIIB emission requirements. With this in mind, the AEM is now providing a new best practices guidance bulletin. This publication highlights the fact that removing sulphur and other compounds from ULSD fuel decreases its conductivity and increases its ability to store static charge. “Static electricity discharge when combustible vapours are present could result in a fire or explosion,” according to the bulletin.

All off-highway diesel-powered machines in the US are now using this new formulation of ULSD and there may be a greater risk of static electricity ignition if their refuelling systems are not properly functioning or maintained. Similar ULSD fuels are also being used in Europe as well as Japan, where exhaust emission restrictions have also resulted in the introduction of new generation, low emission diesel engines. The AEM bulletin urges industry workers to consult with fuel suppliers to ensure delivery systems are in compliance with fuelling standards. And this bulletin also contains information of relevance to machine users in the EC and Japan.

“About 90% of off-road equipment is run on diesel and at one time the fuel had upwards of 5000ppm sulphur content compared with 15ppm today,” stated Mike Weber, AEM technical and safety services manager. “ULSD is now required for on-highway and off-highway applications in the North American market and we need to educate users who may be unaware of the changes in the physical properties of ULSD and the potential for harm during refuelling.”

For more information on companies in this article

Related Content

  • Key moves for diesel engine sector
    January 22, 2014
    A series of key moves are being seen in the diesel engine sector, with major firms offering new solutions – Mike Woof writes Several of the major engine builders are introducing key innovations from the beginning of 2014 to meet with tough new emissions regulations for Europe and the US. Another key issue is providing solutions for engine customers in countries with less stringent regulations on emissions. Caterpillar has developed options for customers in lesser regulated countries who may wish to buy seco
    Read More
  • Key innovations in engines and drivelines technology at Conexpo 2014
    April 22, 2014
    Engines and drivelines technologies have move forward, as could be seen at Conexpo 2014 - Geoff Ascroft reports Solutions for Tier 4 Final emissions regulations dominated Conexpo 2014, with many firms showing off their options of DOC, DPF and SCR after-treatments. Deutz, while staying with an SCR-only solution, took a more unusual approach on its high horsepower V6 12litre and V8 16litre engines. Both get a dual SCR after treatment system to meet Tier 4 Final emission standards. Using a dual SCR system,
    Read More
  • A fresh breath of air
    July 16, 2012
    With a new wave of exhaust emission regulations coming shortly, engine manufacturers are well on track to develop new solutions as Mike Woof reports A wave of technological advances has made the current generation of diesels the cleanest industrial engines ever produced. Driven by tightening controls on emissions, manufacturers have had to develop an array of innovative solutions that will help cut particulate and NOx being emitted from the tailpipe. When the phased reduction in exhaust emissions was first
    Read More
  • 2014 is seeing a range of engine emissions solutions coming to market
    February 19, 2014
    For the off-highway equipment sector, 2014 is a year of note, as this is when the Tier 4 Final/Stage IV emissions legislation starts to be phased in for North America, Europe and Japan. For several years now engine manufacturers have been working hard to meet the demands of emissions targets set by legislators. This has been an extremely challenging task and one that many in the industry believed all but impossible just 10 years ago. Manufacturers have spent enormous sums developing engines that produce low
    Read More

Highlighted Content