Skip to main content

XCMG provides rescue capabilities to Chinese earthquake area

Within 24 hours after the 6.5 magnitude earthquake, XCMG was hard at work on site XCMG recently provided a fast emergency response to an earthquake-stricken area of China. The firm’s rescue team rushed to provide help following the 6.5-magnitude earthquake which hit Ludian County in Yunnan Province. Rescuers reported 398 deaths, 1,801 injured, and in excess of 10,000 buildings having collapsed.
January 5, 2015 Read time: 2 mins
XCMG excavator is urgently repair the road in the landslide area in Longtou Mountain Town

Within 24 hours after the 6.5 magnitude earthquake, XCMG was hard at work on site

XCMG recently provided a fast emergency response to an earthquake-stricken area of China. The firm’s rescue team rushed to provide help following the 6.5-magnitude earthquake which hit Ludian County in Yunnan Province.

Rescuers reported 398 deaths, 1,801 injured, and in excess of 10,000 buildings having collapsed.

The Chinese authorities started a Level-1 emergency response, with XCMG responding quickly by setting up its own rescue team, which mobilised heavy equipment, including truck cranes, wheeled loaders, and excavators to provide assistance.

Within 24 hours of the earthquake having struck, XCMG had delivered seven wheeled loaders, four excavators, and two cranes to carry out urgent repairs to the main highway and on-site earthquake relief work.

The use of the equipment was directed by the Zhaotong Traffic Bureau and Highway Bureau. Six of the machines were used to repair the highway from Zhaotong Highway Bureau to Ludian. Four XCMG loaders repaired the landslide section in the highway towards the disaster-stricken area, with the work carried out overnight. And XCMG excavators repaired the landslide-damaged road in Longtoushan Township.

In such a disaster, the time taken to respond is crucial as delays can cost lives. When the news of the earthquake became known, XCMG chairman Wang Min responded by mobilising the firm’s nearest rescue forces quickly to assist in the relief work, set up the earthquake relief headquarters in Zhaotong under vice president Sun Jianzhong, and established the rescue team with locally available equipment.

A large XCMG wheeled loader was used in Longtoushan Township very soon after the earthquake, but the damage to roads and a bridge caused by a landslide meant that pieces of equipment had to be kept on standby 6km away until the links could be repaired sufficiently.

Only disaster relief vehicles were allowed on the road to the disaster-stricken area, with heavy equipment and civilian vehicles not being permitted to enter the area. However, police officers in charge of the traffic realised the importance of bringing the heavy equipment to the site quickly and relieved the congestion as quickly as possible so that the XCMG machines could be delivered to the stricken area.

Related Content

  • Austria's new tunnel meets safety regulations
    July 13, 2012
    New safety regulations and high traffic volumes require new tunnel construction all across Europe. Mike Woof reports Anew highway tunnel now being built in Austria will boost traffic volumes and safety standards on a key European route. The existing Pfänder Tunnel lies close to Austria's borders with Germany and Switzerland and carries a heavy traffic volume, so a new parallel tunnel is under construction to help spread this load, increasing capacity as well as safety. Stringent tunnel safety standards have
  • Tunnels eliminate bottlenecks
    February 10, 2012
    Some of the bottlenecks on the multi-lane Mittlere Ring, Munich, Germany, one of the main arterial roads circling the city centre have been eliminated by the addition of new tunnels. The Luise-Kiesselbach Square, the last section of this road improvement effort, is an important traffic hub south-west of the city where motorways A96 from Lindau and A5 from Garmisch meet, causing long delays in daily rush-hour traffic, writes Patrick Smith.
  • XCMG sets out six stage path for future plans
    October 14, 2013
    XCMG has seen strong exports, with one deal in particular providing a major boost to turnover - Mike Woof writes It is rare that a single machine order can provide a substantial portion of a large manufacturer’s annual results. However the firm’s massive contract signed with the Venezuelan Government was a major boost to XCMG; the supply of no less than 6025 machines in a deal worth some US$750 million. This order came at an important time for the company when the world demand for construction equipment sl
  • Safer cone collection with X-Cone among the latest safety innovations
    August 30, 2017
    X-Cone is a new traffic cone management system offering a higher level of safety for workers and maximum efficiency for contractors. Austrian-made X-Cone is a truck-mounted system that can manage the setting out and collection of cones from the flatbed of any 3.5tonne vehicle. It does not matter if the cones are straight or laying on the road, the X-cone can still manage the work quickly, safely and reliably, according to the manufacturer. For setting out standard cones, the driver can decide the distance b