Skip to main content

Signify’s LEDs for Dublin tunnel

Lighting specialist Signify has equipped the 9km-long Dublin Port Tunnel in Ireland with energy efficient LED lighting for all the route’s 1,800 light points. The quality of lighting for drivers in the tunnel improved from CRI25 to CRI70
August 1, 2023 Read time: 2 mins

 

Since the end of 2006, Dublin Port Tunnel has provided a link to the wider motorway network between Dublin Port and the M50 motorway, routing heavy goods transport quickly, quietly and safely away from city and residential areas. Contractors replaced the existing Philips WRTL SON-T lighting – installed 17 years ago - with LED lights which dramatically reduced the energy needed to keep the lights on. Installers made use of the existing high-quality housings which were all retested and CE marked to current standards.

Philips METIS 2816 LED insert trays were fitted. As the new lights were made to perfectly fit the existing fittings, installation could be completed with minimal disruption to road users. Installers worked during late night and early morning hours over five weeks. Each lantern took just five minutes to strip out and replace. Reusing materials also kept the project’s capital expense to a minimum, saving an estimated €3 million compared to a new installation.

Signify says that the upgrade has achieved up to 60% reduction in electricity use, based on 2022 rates - the equivalent of the electricity consumed by up to 300 Irish households. Over the coming five years, the project is expected to save upwards of €4 million in electricity costs. The project is part of the Irish government’s energy efficiency plans and was partially funded through the European Green Deal. Tunnel maintenance operator ERTO was instructed by Transport Infrastructure Ireland to find a solution that would reduce energy costs and improve the quality of light in the tunnel. Signify says that its LED retrofit solution was selected for its ease of replacement and impressive cost savings, which are especially significant in the context of the current energy crisis.

“The replacement of the original SON lamps with LED inserts is a huge step towards reducing the carbon emissions, energy consumption and future maintenance of the Dublin Port Tunnel,” said Patrick O’Hanlon, senior engineer at Transport Infrastructure Ireland.

“With public lighting accounting for 24% of Dublin Council’s energy expenditure, energy efficiency projects like this one can make an enormous positive impact,” said Dermot Deely, managing director at Signify Ireland. “Through a relatively simple upgrade, we’ve been able to improve light quality, cost, maintenance, and sustainability for Dublin Port Tunnel. We are particularly proud to have supported these environmental goals while giving a second life to many of the materials that were already in place.”

For more information on companies in this article

Related Content

  • London borough trials reduced carbon asphalt
    December 10, 2024

    Redbridge is the first borough in London to trial a new asphalt mix that can reduce the carbon footprint in road resurfacing works. The project has been led by Redbridge Council, in partnership with Kensons Highways, using the asphalt for road resurfacing at Lodge Hill, in Ilford.

    The asphalt mix, supplied by Tarmac, lowered the carbon footprint from road resurfacing by incorporating a carbon negative product into the mix, called ACLA. Results showed that using ACLA, Tarmac’s asphalt reduced the project’s carbon footprint by 68%.

  • Importance of road/tunnel drainage systems
    April 10, 2012
    A variety of systems are available for quickly and efficiently removing water from roads as Patrick Smith reports The presence of water in a highway layer reduces the bearing capacity of the road, and in doing so it also reduces the structure's lifetime. Indeed, the recent extremely cold winter in many parts of Europe has shown that in colder climates there is a risk of frost damage when water is present resulting in costly potholes, so drainage systems performing properly are important in road design.
  • Importance of road/tunnel drainage systems
    May 8, 2012
    A variety of systems are available for quickly and efficiently removing water from roads as Patrick Smith reports. The presence of water in a highway layer reduces the bearing capacity of the road, and in doing so it also reduces the structure's lifetime. Indeed, the recent extremely cold winter in many parts of Europe has shown that in colder climates there is a risk of frost damage when water is present resulting in costly potholes, so drainage systems performing properly are important in road design.
  • Responsive roadsign developed by student
    August 22, 2013
    A UK student hopes his new lenticular road signs which ‘pulse’ at drivers will lead to a revolution in the way motorists are given information on the roads. Meanwhile, a leading road marking firm is helping keep tourists safe in a spiritually significant town in Umbria, Italy. Guy Woodford reports You may think Charles Gale’s vision of creating the first ‘pulsing’ lenticular road sign was the result of months, even years, spent studying traffic and driver behaviour on the roads of his adopted student c