Skip to main content

Signify’s LEDs for Dublin tunnel

Lighting specialist Signify has equipped the 9km-long Dublin Port Tunnel in Ireland with energy efficient LED lighting for all the route’s 1,800 light points. The quality of lighting for drivers in the tunnel improved from CRI25 to CRI70
August 1, 2023 Read time: 2 mins

 

Since the end of 2006, Dublin Port Tunnel has provided a link to the wider motorway network between Dublin Port and the M50 motorway, routing heavy goods transport quickly, quietly and safely away from city and residential areas. Contractors replaced the existing Philips WRTL SON-T lighting – installed 17 years ago - with LED lights which dramatically reduced the energy needed to keep the lights on. Installers made use of the existing high-quality housings which were all retested and CE marked to current standards.

Philips METIS 2816 LED insert trays were fitted. As the new lights were made to perfectly fit the existing fittings, installation could be completed with minimal disruption to road users. Installers worked during late night and early morning hours over five weeks. Each lantern took just five minutes to strip out and replace. Reusing materials also kept the project’s capital expense to a minimum, saving an estimated €3 million compared to a new installation.

Signify says that the upgrade has achieved up to 60% reduction in electricity use, based on 2022 rates - the equivalent of the electricity consumed by up to 300 Irish households. Over the coming five years, the project is expected to save upwards of €4 million in electricity costs. The project is part of the Irish government’s energy efficiency plans and was partially funded through the European Green Deal. Tunnel maintenance operator ERTO was instructed by Transport Infrastructure Ireland to find a solution that would reduce energy costs and improve the quality of light in the tunnel. Signify says that its LED retrofit solution was selected for its ease of replacement and impressive cost savings, which are especially significant in the context of the current energy crisis.

“The replacement of the original SON lamps with LED inserts is a huge step towards reducing the carbon emissions, energy consumption and future maintenance of the Dublin Port Tunnel,” said Patrick O’Hanlon, senior engineer at Transport Infrastructure Ireland.

“With public lighting accounting for 24% of Dublin Council’s energy expenditure, energy efficiency projects like this one can make an enormous positive impact,” said Dermot Deely, managing director at Signify Ireland. “Through a relatively simple upgrade, we’ve been able to improve light quality, cost, maintenance, and sustainability for Dublin Port Tunnel. We are particularly proud to have supported these environmental goals while giving a second life to many of the materials that were already in place.”

For more information on companies in this article

Related Content

  • Better road surfaces to last longer
    August 23, 2013
    Preservation can make roads perform better and last longer - and save money in the long run. Kristina Smith reports BAM Wegen has laid the first ever half-warm porous asphalt section on a major highway in the Netherlands. The asphalt for the 500m-long test section on the A18 near Varsseveld was produced at 105°C rather than 160°C, representing a saving on energy and CO2 emissions of around 30%.
  • From rubber to nanotechnology, new additives give longer life
    March 12, 2014
    This month: rubber comes to the rescue for cash-strapped UK authorities and Italian towns plagued by road noise; Japanese nanotechnology fights monsoon damage in India; and a new research programme promises to help define whether ‘sustainable’ bitumen technologies really live up to their billing - Kristina Smith writes A new venture in the UK aims to encourage the use of recycled tyres in road pavements. Billian UK is now manufacturing GTR Pellets which combine bitumen, ground tyre rubber (GTR) and miner
  • Australian bridge slides into position
    July 18, 2012
    A heavy rail crossing as part of Australia's EastLink motorway demanded great ingenuity and careful planning Most of the 88 bridges on the EastLink tolled motorway in, Melbourne, Australia were kept as simple and straightforward as possible. Contractor Thiess John Holland (TJH) developed its own precast yard 150km from the city, which provided many of the prefabricated materials required for the structures. This offered speed and economy while logistics and sequencing were vital for their erection. But the
  • Advanced grooving method for UK motorway
    June 10, 2015
    Balfour Beatty Mott MacDonald has used Klaruw’s advanced longitudinal grooving system, GrooveTex, to retexture sections of concrete surface on the M20 motorway in the county of Kent, UK. The GrooveTex system improves and restores surface skid resistance by creating micro longitudinal grooves using closely spaced diamond tipped saw blades at a predetermined width and depth. GrooveTex is based on the diamond grinding principle. GrooveTex adjusts to and follows the profile of the surface. The surface lev