Skip to main content

New bridge over Nile will help landlocked Uganda

A new River Nile bridge is essential to boost trade and improve traffic in landlocked Uganda. Shem Oirere reports A new bridge across the River Nile at Jinja, to be constructed by Uganda, is promising to boost trade in eastern Africa and pave the way for smooth and safe traffic in and out of this landlocked country. The bridge, also known as the Second Nile Bridge, is the first cable-stayed bridge in the region and will be constructed at Njeru, 80km east of the Ugandan capital Kampala, along the Kampala-Jin
April 3, 2013 Read time: 4 mins
An impression of how the new bridge will look

A new River Nile bridge is essential to boost trade and improve traffic in landlocked Uganda. Shem Oirere reports

A new bridge across the River Nile at Jinja, to be constructed by Uganda, is promising to boost trade in eastern Africa and pave the way for smooth and safe traffic in and out of this landlocked country.

The bridge, also known as the Second Nile Bridge, is the first cable-stayed bridge in the region and will be constructed at Njeru, 80km east of the Ugandan capital Kampala, along the Kampala-Jinja-Malaba international trunk road.

It will complement the existing 1954-built Nalubaale Bridge, located 750m downstream and whose lifespan has elapsed according to 1069 Uganda National Roads Authority (UNRA).

The bridge is a major link in the Northern Corridor which links the Indian Ocean port city of Mombasa in Kenya to Matadi port in Democratic Republic of Congo.

Although the need for the bridge is urgent, the Nalubaale Bridge will continue to be used until completion of the new crossing in 2016: closing it would jolt the economic activities in Uganda and separate the south-eastern part of the country from the north-western regions.

The new 525m-long bridge will comprise a dual carriageway, two-way, single-plane cable-stay bridge. It will have a central span of 290m and end spans of 135m and 100m on the east and west banks respectively.

The bridge’s foundation of 2m or larger diameter, embedded approximately 15-30m deep through weathered to hard road. The pylon will be an inverted Y-shape approximately 70-80m high.

Its girder will comprise of 2.5m or more pre-stressed box girder with webs and/or tie braces. Multi-strand stay cables with internal anchorage will be used.

The new 2.1km long asphalt approach roads will involve construction of three at-grade junctions to allow interchange of traffic where the new road approaches meet existing road network.

“Design studies included a geotechnical site investigation to depths of 30m location in sound rock and a search in the surrounding area to find materials suitable for concrete aggregate and for construction of the approach roads. Wind tunnel tests were undertaken in Korea to verify stability of the bridge under wind conditions,” says UNRA.
UK structural engineering company Arup UK carried out independent design checks concurrently with the release of the final design which confirmed the bridge complies with “the highest standards of the design and that in addition to local design standards, Japanese standards, British standards and Eurocode traffic load models were employed.”

Daniel Alinange said in February that three consortiums had been prequalified for the project. These include Strabag-RDE-Jinja (Germany/Italy); Zenitaka-Hyundai Joint Venture (Japan/South Korea), and Vinci Construction Grands Projects-Orascom (France/Egypt) and Construction-Sogea Satom Jinja Joint Venture (France).

Construction of the new bridge appears to be a response to safety concerns raised by users of the existing Nalubaale Bridge which is currently in a state of disrepair.

“The ever-increasing trade volumes between Kenya, Uganda, Rwanda, Burundi, South Sudan and DRC have only served to increase the wear and tear of both the dam and bridge structures and resulting from growing traffic volumes and excessive overloading,” said a release by the Ministry of Works and Transport.

Uganda hopes to use the construction of the second Nile Bridge to strengthen its transport capacity of the Northern Corridor and ensure traffic safety, the ministry says.

The Northern Corridor is Uganda’s most important highway as it forms nearly 7% of the country’s road network and conveys close to 32% of its traffic. Statistics indicate the corridor’s transit/trans-shipment traffic is over 2.2 million tonnes/day, volumes which grow at the rate of 20% annually.

Uganda relies on the port of Mombasa in neighbouring Kenya for up to 80% of its exports and imports, and 95% of these pass through the Northern Corridor.

“The condition at the existing Naluubale Bridge has deteriorated and the narrowness of the lanes and other factors hinder the smooth, safe flow of traffic,” says 6706 JICA (Japanese International Cooperation Agency), which is financing up to 80% of the project.

“The volume traffic between the port of Mombasa and Kampala is predicted to increase in the future and the construction of the new bridge is a pressing task to ensure the smooth and safe flow of traffic.”

Analysts predict the new bridge will be critical in enhancing intra-regional trade among countries using the Northern Corridor such as DRC, Uganda, South Sudan, Burundi and Rwanda and will boost ongoing efforts to integrate the economies of these countries under the East African Community.

For more information on companies in this article

Related Content

  • Upgrading Bolivia’s important Uyuni – Condo K Highway
    May 16, 2016
    Upgrading Bolivia’s Uyuni – Condo K route will help boost the country’s economy - Mauro Nogarin writes. The area of influence along the new Uyuni - Huarancani - Condo K road in Bolivia is of major importance to the country’s economy as it has great agricultural potential for quinoa. The highway is located in south-western Potosi and it has a cultivated area of 55,000ha, with an annual output of 13,154tonnes of quinoa. South-western Potosi is also one of the areas with the highest population of camelid lives
  • Tunnel Boom in Central and Eastern Europe
    September 15, 2015
    Following the success of the 41st World Tunnel Congress held in Croatia last May, World Highways looks at two signi_ cant projects in Slovakia and Serbia – Adriana Potts reports Central and Eastern Europe is buzzing with a number of major projects being developed - including highways, bridges and tunnels – and with many more in the pipeline. The region is expected to be highly active with plans for developing infrastructure in the next two decades, according to Davorin Koli , president of the Croatian
  • UK: Work starts on Mersey Gateway main bridge deck
    June 2, 2016
    Work has started on 2.2km Mersey Gateway’s main bridge deck as the project enters its third year of construction. The new six-lane toll bridge will link the English towns of Runcorn and Widnes and teams will begin to connect the steel support cables to the deck and upper pylons this summer. Trinity, the project’s movable scaffolding system (MSS), has cast the first 250m of the north approach viaduct and a new MSS is on its way to Halton to build the south approach viaduct. The local road network is al
  • PERI’s balancing act at the Harpe Bru Bridge in Norway
    May 24, 2016
    Plans for the European Route E6 expansion in Norway include the 320m-long Harpe Bru Bridge over the Gudbrandsdalen Lågen River, at Sør-Fron in Oppland province. For the superstructure, PERI civil engineering technology experts developed a balanced cantilevered solution based on the VARIOKIT Engineering Construction Kit. Statens vegvesen, Norway’s agency for public road building, selected an extradosed cable-stayed bridge design – the first such bridge in Norway. It combines the load-bearing behaviour