Skip to main content

MOBA’s earthmoving machine controls optimise performance on Russian highway contract

An optimum infrastructure is a decisive factor for the economy of every country in order to facilitate a fast and reliable transport of goods. In Russia, which covers more than 17 million km², the expansion and maintenance of trans-regional roads plays a decisive role Transportation delays and failures due to non- or poorly-upgraded roads cost the country approximately 9% of economic output. Statistics from the Ministry of Transport show that only 8% of all Russian roads are multi-lane. The Russian governme
April 3, 2013 Read time: 3 mins
An excavator on the St Petersburg to Moscow highway is fitted with MOBA Easy Dig

An optimum infrastructure is a decisive factor for the economy of every country in order to facilitate a fast and reliable transport of goods. In Russia, which covers more than 17 million km², the expansion and maintenance of trans-regional roads plays a decisive role

Transportation delays and failures due to non- or poorly-upgraded roads cost the country approximately 9% of economic output. Statistics from the Ministry of Transport show that only 8% of all Russian roads are multi-lane. The Russian government attaches increased importance to the progress of major infrastructure projects such as the construction of the near 700km long motorway from St Petersburg to Moscow.

With this prestige project, the ZAO VAD construction consortium is using technology from 1228 MOBA Mobile Automation. For the construction of embankments of the motorway, which ranges from four to ten lanes depending on section, the company is using a number of excavators with the company’s Easy Dig excavator system.

“Decisive for this project was the fact that the excavators can construct the embankments on the sides of the roads at exactly the specified incline. This can be performed quickly and efficiently with the system,” says Yuri Selesnev, Korrus branch manager in St Petersburg.

Easy Dig uses slope sensors on booms, sticks, buckets and the frame to determine the exact incline angle, the excavation depth and range. As a result, each work step can be performed precisely according to the desired specifications.
“And that is particularly important to us, because we stand for very high quality at our construction sites and therefore need high-precision results,” says Selesnev.

With Easy Dig, it is said excavators can be used effectively and achieve exact results. Interruptions or pauses for example for control measurements are not necessary. By completing the work more quickly, fuel consumption is also reduced and the construction company needs fewer personnel since manual re-measurements with a levelling staff are no longer required.

MOBA says the safety standard on the construction site increases because no personnel need to be located in the working area of the machine.

“What we like very much is the Russian menu system and the availability of all documents such as the operating instructions in Russian. This makes both installation as well as operation very easy", says Selesnev.

“The operator can view all current values on the panel: the additional LED display also simplifies orientation. Even at construction sites where there is limited visibility, this allows work to be performed with precision.”

Easy Dig has watertight sensors making it possible to work under water. Furthermore, the system can easily be upgraded at any time to Link or to Vision 3D, the high-end system, says MOBA.

For more information on companies in this article

Related Content

  • Smart excavators coming to market
    March 23, 2021
    New excavators coming to market offer a combination of increased performance and smart technology
  • Optimising operations with construction software gains
    May 20, 2015
    Innovations in construction software are helping boost project efficiency and optimising project operations – Clive Davidson writes Over the past decade, while construction engineers have been putting up buildings or infrastructure, software engineers have been developing a parallel universe where virtual buildings or infrastructure can be created in ever increasing detail. What started with 2D architectural drawings in computer-aided design (CAD) systems, has become a multi-dimensional world, with 3D ge
  • Statistics important to assessment of transport projects
    April 13, 2012
    IRF Geneva's statistics guru, Cristian Gonzalez, explores the growing importance of data in public and private assessments of transport projects IRF's work on statistics is rarely in the limelight. It is, however, an essential component of the federation's key advocacy role on behalf of its members. Statistics are, indeed, a vital function of authoritative lobbying and knowledge sharing on the range of issues impacting our sector - from highlighting the persuasive economic business cases for investment in
  • Hitachi appoints dealer in Latvia
    November 30, 2012
    Hitachi Construction Machinery (Europe) NV (HCME) has appointed Repa SIA as its new dealer for customers in Latvia. Repa, who replace Laadur OU, was established in 1991 as a dealer for used construction equipment. The head office is located in Riga and includes a 280m² office and 600m² workshops. The company employs seven sales personnel, ten technicians and six administrative staff. A subsidiary of the MONO Group, one of the largest enterprises in Latvia, and owner of companies specialising in highway engi