MOBA’s earthmoving machine controls optimise performance on Russian highway contract

An optimum infrastructure is a decisive factor for the economy of every country in order to facilitate a fast and reliable transport of goods. In Russia, which covers more than 17 million km², the expansion and maintenance of trans-regional roads plays a decisive role Transportation delays and failures due to non- or poorly-upgraded roads cost the country approximately 9% of economic output. Statistics from the Ministry of Transport show that only 8% of all Russian roads are multi-lane. The Russian governme
April 3, 2013 Read time: 3 mins
An excavator on the St Petersburg to Moscow highway is fitted with MOBA Easy Dig

An optimum infrastructure is a decisive factor for the economy of every country in order to facilitate a fast and reliable transport of goods. In Russia, which covers more than 17 million km², the expansion and maintenance of trans-regional roads plays a decisive role

Transportation delays and failures due to non- or poorly-upgraded roads cost the country approximately 9% of economic output. Statistics from the Ministry of Transport show that only 8% of all Russian roads are multi-lane. The Russian government attaches increased importance to the progress of major infrastructure projects such as the construction of the near 700km long motorway from St Petersburg to Moscow.

With this prestige project, the ZAO VAD construction consortium is using technology from 1228 MOBA Mobile Automation. For the construction of embankments of the motorway, which ranges from four to ten lanes depending on section, the company is using a number of excavators with the company’s Easy Dig excavator system.

“Decisive for this project was the fact that the excavators can construct the embankments on the sides of the roads at exactly the specified incline. This can be performed quickly and efficiently with the system,” says Yuri Selesnev, Korrus branch manager in St Petersburg.

Easy Dig uses slope sensors on booms, sticks, buckets and the frame to determine the exact incline angle, the excavation depth and range. As a result, each work step can be performed precisely according to the desired specifications.
“And that is particularly important to us, because we stand for very high quality at our construction sites and therefore need high-precision results,” says Selesnev.

With Easy Dig, it is said excavators can be used effectively and achieve exact results. Interruptions or pauses for example for control measurements are not necessary. By completing the work more quickly, fuel consumption is also reduced and the construction company needs fewer personnel since manual re-measurements with a levelling staff are no longer required.

MOBA says the safety standard on the construction site increases because no personnel need to be located in the working area of the machine.

“What we like very much is the Russian menu system and the availability of all documents such as the operating instructions in Russian. This makes both installation as well as operation very easy", says Selesnev.

“The operator can view all current values on the panel: the additional LED display also simplifies orientation. Even at construction sites where there is limited visibility, this allows work to be performed with precision.”

Easy Dig has watertight sensors making it possible to work under water. Furthermore, the system can easily be upgraded at any time to Link or to Vision 3D, the high-end system, says MOBA.

For more information on companies in this article

Related Content

  • New barrier, crash cushion and access control technology will benefit road user safety
    October 26, 2012
    Protecting road users, with barriers, crash cushions or access control systems, is crucial for network safety - Mike Woof writes Tough regulations are now in place in Europe and the US, requiring road authorities to provide safer road infrastructure than in the past. Technologies to reduce the severity of vehicle impacts against obstructions or redirect vehicles into the roadway should help cut injuries amongst drivers and passengers alike. The specifications for the use of crash cushions and barriers can v
    Read More
  • Sandvik tunnelling equipment boosts Sochi 2014
    August 28, 2013
    Sandvik Construction is among leading equipment manufacturers playing a key role in building a network of road and rail tunnels on one new and one existing transport route in and around the Russian coastal city of Sochi as part of a US$47.75 billion investment in preparations for the Sochi 2014 Winter Olympics. Guy Woodford reports Sandvik Construction’s tunnelling equipment team in Russia have been very much in demand over the past three years. Since 2010, they have been overseeing the seven Russian c
    Read More
  • The next generation of the WR series delivers higher mixing performance and quality
    June 2, 2025
    At bauma, Wirtgen presented the latest generation of the WR series, developed by the company especially for cold recycling and stabilisation applications. The machines impress with an optimised operating concept and consistently high productivity and mixing quality. With the new operator’s cabin and a revised and improved operating concept, the WR series machines enable the achievement of particularly efficient and cost-effective workflows.
    Read More
  • Machine control used for road revamp for Arkansas highway
    June 23, 2015
    A historic route in the US state of Arkansas has benefited from the use of machine control during its upgrade The south-west - north-east US Route 67 in Arkansas has long been a significant transport route. This old road follows the natural break between the Ozark Mountains and the Ouachita Mountains. In the 1920s, funding became available for road paving, and the route was designated US Route 67.
    Read More

Highlighted Content