Hitachi upgrades European mini excavator facility

Hitachi Construction Machinery (Europe) NV (HCME) has upgraded its European mini excavator factory to boost manufacturing efficiency. The firm has officially opened its mini and compact excavator factory at Oosterhout, in the Netherlands. The new 8,000m2 facility is the result of an extensive modernisation programme, which commenced in January 2018. The firm says that the upgrade will increase efficiency at the factory that is responsible for producing the ZX10 to ZX85 models. It will also meet the growing
July 19, 2018 Read time: 2 mins
Hitachi has officially opened its new mini excavator facility in the Netherlands

233 Hitachi Construction Machinery (Europe) NV (1139 HCME) has upgraded its European mini excavator factory to boost manufacturing efficiency. The firm has officially opened its mini and compact excavator factory at Oosterhout, in the Netherlands. The new 8,000m2 facility is the result of an extensive modernisation programme, which commenced in January 2018.

The firm says that the upgrade will increase efficiency at the factory that is responsible for producing the ZX10 to ZX85 models. It will also meet the growing demand for Hitachi mini and compact excavators across Europe.

The factory’s general manager, Marco Verhoef, said, “We have already doubled our output since 2014 from 2,500 to 5,000 machines by 2018. The renovation of the factory was necessary to help us grow further, and will enable us to produce more than 7,000 machines/year, according to market demand.”

As part of the upgrade, a state-of-the-art, semi-automatic assembly line has been installed, as well as new equipment and paint booths. The staff at the factory have adopted a new approach, which means completing tasks within a certain amount of time, optimising work flow. Inventory has also been reduced by following the latest lean manufacturing methods.


“Thanks to all of our dedicated personnel, we now have a fully redesigned and modernised factory, and are very proud of what we have achieved. We are ready for the future, to supply more machines at shorter delivery times and lower costs.”

Finance & Funding

For more information on companies in this article

Related Content

  • New runway for US military airbase in Florida
    December 7, 2017
    A new runway surface has now been laid at MacDill Air Force Base in the US, located approximately 6.4km south-west of downtown Tampa, Florida. This facility is the base for the US Air Force’s Air Mobility Command, which provides airlift, special missions, aerial refuelling, and aeromedical evacuation for the armed forces. MacDill is home to 16 KC-135 Stratotankers and three C-37 Gulfstreams, which use the runway every day. At any point, there will be a steady flow of aircraft departing and landing on the
    Read More
  • Wirtgen KMA 220 passes with flying colours at Cologne/Bonn Airport
    July 25, 2018
    A Wirtgen KMA 220 produces hydraulically bound base using a mix-in-plant process for recycling at Cologne/Bonn Airport. With the mobile KMA 220 mobile cold recycling mixing plant from Wirtgen, road construction materials can be recycled or upgraded in just about any location. This avoids countless transport trips and is also sustainable and environmentally friendly. Finally, it is extremely economical, according to Wirtgen. This became clear from a job at Cologne/Bonn airport at the end of 2017. The plan
    Read More
  • Case's latest 400 Series 3 range
    July 17, 2012
    With the latest 400 Series 3 range Case says it is offering a competitive line-up comprising five radial lift skid steers, three vertical lift models and four compact tracked loaders. Lifting capacities range from 680-1,750kg with power outputs from 44.7-67kW. The 400 Series 3 machines feature a new cab with a 7% increase in headroom and a 6% increase in lap-bar width for improved comfort. Depending on the model, the machines also benefit from a 20-80% larger frontal glass area, boosting visibility. A foot
    Read More
  • Manitowoc’s new structure for African sales
    October 4, 2018
    Manitowoc is setting up a new structure for its tower crane business in Africa. The firm’s self-erecting tower cranes (GMA cranes) and top-slewing cranes (GME cranes) are now being operated separately when it comes to production and product management. The company claims that this reorganisation allows for increased customer focus, market intelligence, operations efficiency and crane production. Being run independently in terms of production and product management, the new structure has the sole objectiv
    Read More

Highlighted Content