Skip to main content

Researching vehicle tyre safety

For the last two years a team of European partners has been examining the interaction between vehicle tyres and road surfaces. According to the UK's TRL, one of the partners in the European project Tyrosafe (Tyre and Road Surface Optimisation for Skid resistance And Further Effects), devices to measure skid resistance were developed at the forerunner of the UK's TRL in the 1930s.
February 15, 2012 Read time: 3 mins
The European Tyrosafe project has been examining the interaction between vehicle tyres and road surfaces
For the last two years a team of European partners has been examining the interaction between vehicle tyres and road surfaces.

According to the UK's 777 TRL, one of the partners in the European project Tyrosafe (Tyre and Road Surface Optimisation for Skid resistance And Further Effects), devices to measure skid resistance were developed at the forerunner of the UK's TRL in the 1930s.

"Now there are lots of different types of equipment in use across Europe and around the world. Unfortunately, they operate on different principles and give different results because of the large number of variables affecting road/tyre friction," says the TRL.

The results of Tyrosafe will encourage public authorities of EU Member States to use existing and new research knowledge, to reduce fatalities, and promote environmental compatibility of road surfaces.

"The main objectives of the project were to raise awareness, to coordinate and prepare for European harmonisation, and to optimise the assessment and management of essential tyre/road interaction parameters, in order to increase safety and support greening of European road transport," says Tyrosafe, which completed its two-year project at the end of June.

The project is a coordination action funded by the European Community's Seventh Framework Programme and it consists of seven European partners (coordinator, the 2682 Austrian Institute of Technology; Bundesanstalt für Straßenwesen (1369 BASt), Germany; 2686 Rijkswaterstaat Dienst Verkeer en Scheepvaart - Ministry of Transport and Navigation, The Netherlands; 2687 Slovenian National Building and Civil Engineering Institute; 1364 Forum of European National Highway Research Laboratories, Belgium; Laboratoire Central des Ponts et Chaussées (1368 LCPC), France, and TRL.

"The most significant project outcomes are the recommendations for future policies concerning road surface properties, the Roadmap and Implementation Plan for Harmonisation of Skid Resistance Measurement Techniques, and the report on influences of road surface properties on skid resistance, rolling resistance, noise emissions, their interdependencies, and the investigation of their interaction with climatic change," says Tyrosafe.

"Environmental questions concerning noise pollution, air quality, and consumption of energy are becoming more and more important. Research has shown that road surface properties can be used to achieve increased safety and reduced environmental impact of road traffic. Drivers need sufficient grip between tyres and the road to accelerate, decelerate or change direction.

"With a sufficiently high level of skid resistance, the safety of roads can be improved and the number of accidents can be reduced."

The winners of the Tyrosafe video competition to produce a short video conveying the importance and raising awareness about the interactions among tyres, roads and safety were Gregor Salobir, Alma Muminovi?, Teja Pišek, Anamarija Repuši?, Karmen Vesenjak who produced TyroSafe-CARO Your Car and Road Science Lab.

Related Content

  • TNO tests cooperative adaptive cruise control vehicles
    March 19, 2012
    The Netherlands Organisation for Applied Scientific Research, TNO, is in the process of developing a low cost cooperative adaptive cruise control (CACC) technology. This is being demonstrated in a test fleet of Toyota Prius cars in which factory-fitted long-range radar is used together with wireless vehicle to vehicle communications (802.11p and ETSI Geonet) and GPS based location, to enable CACC.
  • Rhode Island targets concrete roads for major noise reduction project
    October 10, 2012
    The Department of Transport in Rhode Island is about to set up a major noise reduction project on the area’s concrete road surfaces, many of which will be reformed overnight. Work begins now on I-195 in Providence and there will be overnight road closure for most of the Autumn. Nearly one year after the Rhode Island Department of Transportation opened the Iway's final ramp, the Rhode Island Department of Transport (RIDOT) has decided that it needs to reduce the high level of noise that the highway's concret
  • New methods for non-destructive concrete testing
    August 29, 2017
    How best is it possible to assess the state of concrete in a road pavement, bridge deck or tunnel wall? One of the most reliable ways is to take a core of concrete from the structure to analyse and test in the laboratory. One downside to this method is that doing the test creates weak points in the structure that must then be repaired. Another is that the frequency of such cores cannot be too great – so it is possible that some problem areas will be missed. New technologies from the world of geospatial eng
  • Notified Bodies in the field of Vehicle Restraint Systems; ERF calls for a level playing field
    June 8, 2015
    Within the framework of the completion of the internal market, the Member States of the European Union approved the Construction Products Regulation in 2011 Its objective is clear and simple: break down barriers in the field of construction products and create a uniform system of certification that is based on mutual recognition.