Sri Lanka Airport runway upgrade

Sri Lanka’s main international airport now features a new runway surface that will help improve air transport efficiency at the facility The project was carried out successfully, despite a tough time schedule, boosting safety at the airport. This new runway will help increase capacity at the airport, allowing Sri Lanka to develop the tourist sector on which the country depends heavily for its economic growth. The work at the international airport for Sri Lanka’s capital Colombo was carried out with the
December 7, 2017 Read time: 2 mins
Eight Dynapac twin drum rollers worked behind the pavers to bring the mat to the necessary compaction specification

Sri Lanka’s main international airport now features a new runway surface that will help improve air transport efficiency at the facility

The project was carried out successfully, despite a tough time schedule, boosting safety at the airport. This new runway will help increase capacity at the airport, allowing Sri Lanka to develop the tourist sector on which the country depends heavily for its economic growth.

The work at the international airport for Sri Lanka’s capital Colombo was carried out with the help of compaction and paving equipment from 206 Dynapac. The reconstruction of the runway at Colombo Bandaranaike International Airport was completed successfully ahead of schedule and has helped to improve the aviation facilities in Sri Lanka greatly, according to the client.

Because this reconstruction project was prioritised as an important transportation hub for the China Belt & Road Initiative, it was carried out by the Chinese contractor, China National Aero-Technology International Engineering Crop (AVIC-ENG). This contractor specialises in carrying out work outside of China, including construction activities. The firm utilised eight Dynapac twin drum compactors rollers; five of the CC522 models and three of the CC624 units. These asphalt compactors operated behind the four Dynapac pavers; two SD2530CS and two SD2550 models. These machines were able to lay the asphalt and compact it to the tight specification required by the client, ahead of the original time schedule.

Work started on the project at the beginning of 2017 and the job was initially expected to be complete by April 6th 2017. However, the main runway construction was finished before the end of March 2017 due to the efficiency of the contractor’s operations and also the dependability of the equipment and the support provided. Working day and night, the paving crew was able to operate at high speed while delivering a precise finish.

Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Building a major Turkish highway project
    August 15, 2018
    The North Marmara Motorway Project in Turkey has been a major focus for project financing, as well as for novel technical solutions for its construction. This mega infrastructure project is intended to boost transport connectivity between the European and Asian sides of Turkey International law firm Winston & Strawn LLP has advised on major project financing for two sections of the highway. The structure for implementation of the Project is based on the build-operate-transfer (BOT) concession model. The
    Read More
  • Lafarge picks up Vancouver runway deal
    January 24, 2025
    Lafarge Canada will be a subcontractor to Kiewit and in charge of asphalt paving for Vancouver International’s North Runway project.
    Read More
  • Multiple milling machines removing surface
    April 24, 2019
    Milling subcontractor Pavement Recycling Systems removed thousands of tonnes of reclaimed asphalt pavement (RAP) from a runway at Oakland International Airport in California recently. The firm used a fleet of six Wirtgen W 210i cold milling machines to remove the asphalt in less than 60 hours from Runway 12-30, along the shore of San Francisco Bay. In total, 47,000tons of asphalt were milled within a 60-hour time frame, nonstop day and night, plus a single-shift second phase a week later. The firm start
    Read More
  • Dynapac's 'operator efficiency'
    February 6, 2012
    Dynapac claims that the new SD Series tracked pavers are easier to operate and more productive due to their high visibility. The two SD Series medium class pavers, the SD115C and SD135C, offer production rates of up to 750tonnes/hour, as well as increased fuel efficiency. Paving widths are from 2.5m and 3m respectively. Using hydraulic extensions offers paving widths of 6m and using mechanical extensions, maximum paving widths of 8m and 10m respectively can be achieved.
    Read More

Highlighted Content