Paving a Japanese airport within strict time constraints

In Japan, major efforts are being made to both conserve energy and materials, while also delivering high quality airport runways. At Haneda Airport, as well as at the Fukuoka, Chitose and Sendai airports, innovative use is being made of asphalt paving equipment from Sumitomo. The latest model HA60W J paver from Sumitomo is being used to lay warm mix asphalt, while the contractors is also using sophisticated control technology. To minimise disruption to flight schedules, construction work at Haneda has been
September 19, 2012 Read time: 4 mins
At Haneda airport 10 Sumitomo pavers were used simultaneously to lay the entire runway width and benefit from hot to hot joints for long surface life

In Japan, major efforts are being made to both conserve energy and materials, while also delivering high quality airport runways. At Haneda Airport, as well as at the Fukuoka, Chitose and Sendai airports, innovative use is being made of asphalt paving equipment from Sumitomo. The latest model HA60W J paver from Sumitomo is being used to lay warm mix asphalt, while the contractors is also using sophisticated control technology.

To minimise disruption to flight schedules, construction work at Haneda has been carried out during the night and this has included working at low temperatures on occasion. Work has started at around 11:00pm, with cutting out the areas for repairs, followed by laying of the binder course and surface course. Time constraints mean that by 5:00am in the morning, all of the work has to be complete and all machinery removed from the site to allow aircraft movements. For airport maintenance and repair work, punctual working is essential as heavy costs can be incurred should flights be delayed. With such constraints, warm mix asphalt combined with sophisticated paving controls are required to meet the efficiency, quality, cost reduction, and environmental conservation, needs of the application.

One key to the work has been the use of 2714 SUMITOMO’s HA60W J-paver with its novel screed design, which can be extended freely from a minimum paving width of 2.3m to a maximum 6m without the need for a bolt-on extension screed. This saves time by eliminating the need for fitting the extensions and also delivers a high quality surface. The machine is also easy to transport as its width can be reduced using a control on the dash to 2.5m, even with accessories such as sideplates attached. This also allows more time for paving work, as the machine can be made ready to transport away from the site very quickly.

At Haneda Airport, up to 50m was paved simultaneously using a hot to hot joint technique, with 10 HA60Ws working at once. The screed is equipped with tamper, vibrator, and strike-off, allowing the use of various kinds of asphalt mix. In addition, the machine was used successfully in a thick lift pavement of binder course averaging 140mm at Fukuoka Airport. The material used was warm mix asphalt with 20mmT surface course and 30mmT binder course, resulting in an even surface finish without segregation. The paver can also be used with all of the latest paving controls, as well as advanced software tools, to maximise accuracy and efficiency.

For the airport work, screed height adjustment has been controlled automatically by a system combining either GNSS and laser guidance, or using positioning data obtained from a total station and 3D design information. Using this equipment has eliminated the need for conventional sensors, reducing the risk of human error and increasing accuracy, while removing the need for staking out the site and offering benefits for night-time working as a result.

Paving controls do away with preparation time needed for conventional sensors and provide more time for paving, while accuracy is increased, reducing material losses.

The use of warm mix asphalt (WMA) offers particular benefits for night-time working, which was why this material was used for these airport jobs. With warm mix, paving temperatures are reduced by 30-50°C when compared to conventional hot mix asphalt, while WMA can also be compacted effectively at lower temperatures, leaving a longer time window for paving crews. This reduces logistics problems for materials supply as well as increasing the paving period through the year.

Once laid, WMA can help reduce the incidence of rutting type deformations that can occur with conventional asphalt during hot weather under heavy loads. And importantly, the curing period is reduced after paving the binder course, while WMA also means that the site can be opened at an earlier stage after laying the surface course. Using WMA provides more time for paving and suits the use of the material to time-dependent airport construction operations. In addition, WMA also offers environmental benefits due to the lower energy profile required during its use.
Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Manufacturers have developed key innovations in recycling machines
    March 4, 2015
    Manufacturers are making advances in stabiliser/reclaimers and milling machines - Mike Woof reports. The market for milling equipment is a competitive one, with a range of companies from around the globe now offering machines for this segment: BOMAG, Caterpillar, Dynapac, Roadtec, Volvo CE and Wirtgen. In recent years a number of Chinese firms have entered this segment and determining the number of machines these companies manufacture is difficult, although most of their units are sold in China. But interna
    Read More
  • Dynapac's 'operator efficiency'
    February 6, 2012
    Dynapac claims that the new SD Series tracked pavers are easier to operate and more productive due to their high visibility. The two SD Series medium class pavers, the SD115C and SD135C, offer production rates of up to 750tonnes/hour, as well as increased fuel efficiency. Paving widths are from 2.5m and 3m respectively. Using hydraulic extensions offers paving widths of 6m and using mechanical extensions, maximum paving widths of 8m and 10m respectively can be achieved.
    Read More
  • New M90 surfacing in the UK gain praise
    January 8, 2013
    Early evaluation of surfacing work on the M90 at Rosyth – the first major application of Scotland’s new TS2010 specification – has earned positive praise. Transport Scotland’s determination to obtain pavement that is durable, long lasting and safe (especially in early life) is clearly apparent on the M90 just north of the Forth Road Bridge. Here surfacing has been carried out this spring to TS2010, a tough new specification designed to ensure thin surfacing pavements that work. And the initial prognosis is
    Read More
  • Bergkamp’s improved new slurry and seal paver
    February 27, 2017
    Bergkamp is introducing the M310CS truck-mounted slurry seal and micro surfacing paver, with power coming from its Tier 4 emissions compliant truck engine. With PTO-driven hydraulic pumps, the M310CS has eliminated the need for a side engine. This reduces exhaust emissions, noise and vibration while delivering power and performance equal to the side engine package that is standard on the M310 Paver. The M310CS is said to be productive and features the sophisticated electronic mix control and diagnostic (EMC
    Read More

Highlighted Content