Skip to main content

Volvo DD105 compactors for emerging markets

Features on the DD105 and DD105 OSC include Eco Mode to cut fuel consumption by 30 per cent.
By David Arminas January 7, 2021 Read time: 4 mins
Volvo says that the 86.3kW engine in the DD105 and DD105 OSC compactors make the machines particularly fuel efficient

Volvo Construction Equipment’s 10-tonne asphalt compactors is now equipped with a Tier 3/Stage IIIA engine for the emerging markets.

Volvo says that the 86.3kW engine in the DD105 and DD105 OSC asphalt compactors make the machines particularly fuel efficient. An automatically adjusted power output means the machine delivers only enough power for the job at hand.

Other smart features include Eco Mode which cuts fuel consumption by up to 30 per cent without affecting performance. An auto-idle function reduces engine speed when the roller is stopped.

Inside the cab, ergonomically positioned controls and joystick guarantee effortless maneuverability, while the efficient climate system helps keep the operator comfortable. The rear-mounted engine combined with a curved front glass panel and padded floor contributes to low levels of noise and vibrations within the cab.

Safety and ease of operation are enhanced by the expansive front windscreen which maximises the view down to the drum and spray bars. The structural pillar supporting the roof is at the rear of the cab, meaning the three front glass panels provide an entirely unobstructed view.

When working close to obstacles, the fully adjustable operator station can rotate and slide to the side of the cab to allow a view down the edge of the asphalt – increasing safety and rolling precision.

The 10-tonne compactors come fitted with a 1,680mm wide drum whose design halves the power needed to start the vibration system with no compromise on productivity. This reduces the operator’s exposure to machine vibration while ensuring a smoother finished mat.

Volvo oscillation technology – which eliminates vertical vibrations – in the DD105 OSC offers high compaction performance while producing a non-damaging oscillation movement. This transfers less stress to the surrounding surface, enabling compaction in more delicate application areas, such as bridges, over pipes and close to residential areas.

Additionally, when compacting against a cold joint, the risk of damaging the cold surface is reduced and the material can be more effectively compressed to seal and protect the surface. The oscillatory movement of the drum can also improve surface smoothness by re-aligning the material. To account for the increased wear on the drum surface, the Volvo DD105 OSC roller has a hardened abrasion-resistant alloy steel drum shell which increases longevity.

Also helping operators to achieve a high mat quality in less time is the Compact Assist function powered by the Volvo Co-Pilot display. Compact Assist provides access to a set of work-enhancing apps, including pass mapping and temperature mapping for a real-time insight into the work being undertaken. With easy access to clear and detailed data, the operator can eliminate any damaging over-compaction and ensure complete coverage of the working area.

Both the Volvo DD105 and DD105 OSC feature an automatic water spraying system with triple filtration that provides uniform coverage and variable flow, as well as helping prevent material pick-up. The two water pumps alternate during normal operation. In the rare event of a pump malfunctioning, a constant flow of water to the drum surface is automatically retained.

The large 740-liter water tank means longer time between refills and less downtime. The tank’s low positioning affords the machine a low centre of gravity for excellent stability and can be quickly and easily refilled at ground level.

The double drum compactors are designed for simple servicing and maintenance. The swing-up hood provides complete access to the engine and hydraulic components for efficient service inspections. Using a single key, technicians can access exterior service hatches, while fuses and relays are safely stored in the cab. With ground-level access to the engine, radiator, battery, and filters, daily checkpoints are unobstructed.

When it’s time to leave the jobsite and load the machine onto a transportation truck, operators can rely on the Anti-Slip Control to avoid damaging the pavement.

Model

DD105

DD105 OSC

Operating weight (with ROPS)

kg

10,325

9,851

Drum or rolling width

mm

1,680

Rated engine power

kW

85

Vibration frequency

Hz

40 / 55

39

Amplitude

mm

0.86 / 0.45

0.72

Force

kN

112 / 99

Engine

Volvo D3.8E,
Stage IIIA / Tier 3

Overall length

mm

4,650

Overall width

mm

1,838

Overall height

mm

2,999

 

For more information on companies in this article

Related Content

  • Vögele’s new compact asphalt paver offers sophistication
    January 6, 2017
    Vögele says that its SUPER 800-3i is compact and versatile, offering a range of pave widths extends from 0.5-3.5m. The machine can operate in confined spaces such as in towns and cities and suits duties with local authority contractors. Of note is that it has an AB 220 TV screed, a tamper vibrating model that is unusual in this compact asphalt paving class as competing models tend to feature vibration only.
  • App upgrades and power choices
    November 13, 2024
    The use of apps for more productive screening operations and the dual use of diesel and electric power have helped boost quarry efficiencies, according to Kleeman, Major and Screenscore.
  • Caterpillar is offering new mills and a recycler/stabiliser
    April 21, 2021
    Caterpillar is now offering updated milling machines and a new recycler stabiliser.
  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b