Skip to main content

US driving distances see continued increase

New data released by the US Department of Transportation’s (USDOT) Federal Highway Administration (FHWA) shows that US driving topped 2.53 trillion kilometres in the first six months of 2017. This continues a streak of steadily increasing vehicle distances travelled that began in 2011.
September 6, 2017 Read time: 2 mins

New data released by the 2364 US Department of Transportation’s (USDOT) 2410 Federal Highway Administration (FHWA) shows that US driving topped 2.53 trillion kilometres in the first six months of 2017. This continues a streak of steadily increasing vehicle distances travelled that began in 2011.

The new data, published in FHWA’s latest “Traffic Volume Trends” report – a monthly estimate of US road travel – show that more than 448.4 billion km were driven in June 2017 alone, which is 5.4 billion km more than the previous June. The increase in driving over the first half of the year highlights the growing demands challenging the nation’s roads, and reaffirms the importance of improving US transport infrastructure.

The June 2017 report also includes %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external seasonally-adjusted data Link to data false https://www.transtats.bts.gov/OSEA/SeasonalAdjustment/ false false%>, which is conducted by USDOT’s Bureau of Transportation Statistics as a way to even out seasonal variation in travel and enable vehicle distance travelled comparisons with any other month in any year. The seasonally-adjusted total vehicle distance travelled for June 2017 were 426.6 billion km. Seasonally adjusted June distance increased by 1% compared to the previous June. The estimates include passenger vehicle, bus and truck travel.

In June, US drivers increased total mileage among all five regions of the United States. At 2.2%, traffic in the West – a 13-state region stretching from California to Montana, and including Hawaii and Alaska – led the nation with largest percentage increase in unadjusted distance travelled.

At 0.5%, the North Central region – a 12-state area stretching from North Dakota to Ohio – had the smallest percentage increase in unadjusted VMT for the month.

At 3.5%, Oklahoma led the nation with the largest unadjusted single-state traffic increase compared to the same month a year earlier, followed by Nevada and Kansas at 3.4% and 3.3% respectively. At 2.3%, Michigan had the nation’s largest unadjusted traffic decrease for the month.

To review the VMT data in FHWA's "%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external Traffic Volume Trends Tavel Monitoring information false https://www.fhwa.dot.gov/policyinformation/travel_monitoring/tvt.cfm true false%>" reports, which are based on information collected from more than 5,000 continuous count stations nationwide.

For more information on companies in this article

Related Content

  • Productive mid-size wheeled loaders from Doosan
    January 30, 2013
    High performance and productivity are claimed for the new generation DL200-3 and DL250-3 wheel loaders from Doosan Infracore. Powerful engines and a number of new features help reduce fuel consumption while these machines are also said to be easier to service and offer extended durability. The new cab design provides better visibility and more leg room, while it has a new instrument panel with an integrated VCU (vehicle control unit).
  • New integration with Carlson Machine Control and Atlas Copco’s FlexiROC with HEC3 Drills
    January 6, 2017
    Installation and testing has been completed at the Atlas Copco factory in Örebro, Sweden, on the first system integration of Carlson Machine Control’s CBx5 control box console running Carlson DrillGrade software on a FlexiROC HEC3 C65 drilling system. This is said to mark the first successful factory installation of a 3D drilling system integrating Atlas Copco’s new third party protocol available on FlexiROC drills with the HEC3 system. The first of several systems has been delivered to a mine in Finland an
  • New integration with Carlson Machine Control and Atlas Copco’s FlexiROC with HEC3 Drills
    February 13, 2013
    Installation and testing has been completed at the Atlas Copco factory in Örebro, Sweden, on the first system integration of Carlson Machine Control’s CBx5 control box console running Carlson DrillGrade software on a FlexiROC HEC3 C65 drilling system. This is said to mark the first successful factory installation of a 3D drilling system integrating Atlas Copco’s new third party protocol available on FlexiROC drills with the HEC3 system. The first of several systems has been delivered to a mine in Finland an
  • The IRF Geneva is now bringing policy & practice together
    December 12, 2013
    IRF Geneva will be capitalising on its strategic position at the heart of the city’s international community to host an unprecedented opportunity for high-level dialogue with leading road-related UN agencies and international stakeholder organisations IRF’s rich programme of global events for 2013 will conclude with a rare occasion for both members and non-members to engage directly with key officials driving policy development within the United Nations and its specialised agencies.