Skip to main content

US driving distances see continued increase

New data released by the US Department of Transportation’s (USDOT) Federal Highway Administration (FHWA) shows that US driving topped 2.53 trillion kilometres in the first six months of 2017. This continues a streak of steadily increasing vehicle distances travelled that began in 2011.
September 6, 2017 Read time: 2 mins

New data released by the 2364 US Department of Transportation’s (USDOT) 2410 Federal Highway Administration (FHWA) shows that US driving topped 2.53 trillion kilometres in the first six months of 2017. This continues a streak of steadily increasing vehicle distances travelled that began in 2011.

The new data, published in FHWA’s latest “Traffic Volume Trends” report – a monthly estimate of US road travel – show that more than 448.4 billion km were driven in June 2017 alone, which is 5.4 billion km more than the previous June. The increase in driving over the first half of the year highlights the growing demands challenging the nation’s roads, and reaffirms the importance of improving US transport infrastructure.

The June 2017 report also includes %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external seasonally-adjusted data Link to data false https://www.transtats.bts.gov/OSEA/SeasonalAdjustment/ false false%>, which is conducted by USDOT’s Bureau of Transportation Statistics as a way to even out seasonal variation in travel and enable vehicle distance travelled comparisons with any other month in any year. The seasonally-adjusted total vehicle distance travelled for June 2017 were 426.6 billion km. Seasonally adjusted June distance increased by 1% compared to the previous June. The estimates include passenger vehicle, bus and truck travel.

In June, US drivers increased total mileage among all five regions of the United States. At 2.2%, traffic in the West – a 13-state region stretching from California to Montana, and including Hawaii and Alaska – led the nation with largest percentage increase in unadjusted distance travelled.

At 0.5%, the North Central region – a 12-state area stretching from North Dakota to Ohio – had the smallest percentage increase in unadjusted VMT for the month.

At 3.5%, Oklahoma led the nation with the largest unadjusted single-state traffic increase compared to the same month a year earlier, followed by Nevada and Kansas at 3.4% and 3.3% respectively. At 2.3%, Michigan had the nation’s largest unadjusted traffic decrease for the month.

To review the VMT data in FHWA's "%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external Traffic Volume Trends Tavel Monitoring information false https://www.fhwa.dot.gov/policyinformation/travel_monitoring/tvt.cfm true false%>" reports, which are based on information collected from more than 5,000 continuous count stations nationwide.

For more information on companies in this article

Related Content

  • On-highway regulations point to Scania off-highway emissions solution
    January 6, 2017
    Scania will be showing both Euro 6 engines for its on-highway truck range and Stage IIB/Tier 4 Final powerplants for off-highway use. The company will use both exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) to meet the coming regulations, as with its current Stage IIIB solution. This means the fitting of a diesel oxidation catalyst (DOC) but no requirement for a DPF. Scania engines are currently in use in Terex and Doosan articulated haulers, along with a number of Terex crushing ma
  • Combi Wear Parts has extended its bucket tooth range for excavators in the 200-250 tonne class
    January 6, 2017
    Swedish bucket tooth, cutting edge and bucket protection producer Combi Wear Parts will introduce adapters, teeth and lip shrouds for excavator buckets in the 200-250 tonne class. Designed for cutting edges of both 120mm and 140mm lip thickness , the adapters are built to work with 60-90kg teeth. The firm has also applied for a patent for a new locking mechanism that will feature on its ProClaws tooth system.
  • On-highway regulations point to Scania off-highway emissions solution
    February 7, 2013
    Scania will be showing both Euro 6 engines for its on-highway truck range and Stage IIB/Tier 4 Final powerplants for off-highway use. The company will use both exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) to meet the coming regulations, as with its current Stage IIIB solution. This means the fitting of a diesel oxidation catalyst (DOC) but no requirement for a DPF. Scania engines are currently in use in Terex and Doosan articulated haulers, along with a number of Terex crushing ma
  • Combi Wear Parts has extended its bucket tooth range for excavators in the 200-250 tonne class
    February 7, 2013
    Swedish bucket tooth, cutting edge and bucket protection producer Combi Wear Parts will introduce adapters, teeth and lip shrouds for excavator buckets in the 200-250 tonne class. Designed for cutting edges of both 120mm and 140mm lip thickness , the adapters are built to work with 60-90kg teeth. The firm has also applied for a patent for a new locking mechanism that will feature on its ProClaws tooth system.