Skip to main content

Testing and striping underway for Seattle’s Alaskan Way tunnel

Crews have been working flat out on the Alaskan Way Tunnel in Seattle to install and test thousands of components and 90 interconnected systems. The client, Washing State Department of Transportation, said that Seattle Tunnel Partners began installation inside the double-deck State Route 99 tunnel in March after crews completed construction of the upper and lower roadways. STP said that testing could be complete by as early as late September and the tunnel could open as soon as this fall after an ap
August 31, 2018 Read time: 3 mins
Testing, testing: Seattle Tunnel Partners making sure that equipment and signage operates effectively in the soon-to-open Alaskan Way Tunnel in Seattle (photo courtesy WSDoT)
Crews have been working flat out on the Alaskan Way Tunnel in Seattle to install and test thousands of components and 90 interconnected systems.


The client, Washing State Department of Transportation, said that Seattle Tunnel Partners began installation inside the double-deck State Route 99 tunnel in March after crews completed construction of the upper and lower roadways.

STP said that testing could be complete by as early as late September and the tunnel could open as soon as this fall after an approximate three-week viaduct closure to realign the  SR 99 – called the Alaskan Way - into the new tunnel.

The project is called the Alaskan Way Viaduct Replacement Project after the section of SR 99 in Seattle called the Alaskan Way, a street running along the seafront. Part of the Alaskan Way is an aging 3.2km viaduct – opened in 1953 - which is being replaced by the 2.7km tunnel almost directly beneath it. This will free up waterfront area for major inner city development (see World Highways, %$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 33214 0 link-external key project report false /categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>, November 2017).

The multi-layered tests of the tunnel's operational and safety systems includes pre-functional tests to ensure working of individual equipment such as a sprinkler head. Functional tests check that the equipment works together as a system, for example multiple sprinklers. Finally, integrated testing checks that multiple systems function together - heat detectors and video cameras operate with the fire suppression system.

Striping of the road decks inside the tunnel is also continuing. The stripes separate a deck into two 3.3m lanes, a 2.4m shoulder on the left side and a 0.6m buffer on the right.

Kiewit Infrastructure West has started traffic signal, striping and roadway signage work to switch traffic on Alaskan Way from under the viaduct to the west of it. The viaduct will eventually be demolished after the tunnel is opened likely this fall.


Tunnel boring was completed last year by Bertha, the world’s largest diameter earth pressure balance tunnel boring machine at the time, with a cutterhead diameter of 17.5m. By the end of last year it had been dismantled, job completed.

Seattle Tunnel Partners - a joint venture of New York-based 4761 Dragados US (a subsidiary of Dragados, the construction division of ACS Group of Spain) and the general contractor Tutor Perini Corporation, based in California.

Apart from designing and building the tunnel - and owning Bertha - STP is responsible for building highway ramps and other connections at the north and south ends of the tunnel. STP is also constructing permanent buildings at the north and south portal to house lighting, ventilation and other essential tunnel systems

For more information about the Alaskan Way Viaduct Replacement Program, see the website:

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.alaskanwayviaduct.org false http://www.alaskanwayviaduct.org/ false false%>

For more information on companies in this article

Related Content

  • Hitachi Zaxis 5 wheeled excavators deliver performance
    April 16, 2013
    Hitachi Construction Machinery is showing four models from its Zaxis 5 range of wheeled excavators. The ZX140W-5, ZX170W-5, ZX190W-5 and ZX220W-5 all feature Isuzu Stage IIIB emissions-compliant engines powering the HIOS III hydraulic system. They benefit from increased lifting capacities, as the power boost function has been increased by 11%. The machines have a revised ROPS cab that has been redesigned to improve visibility. A new monitor sits on the right-hand pillar with a rear-view camera providing vis
  • Effer’s powerful hydraulic folding cranes
    January 6, 2017
    Established in 1965, Effer says its wide range of hydraulic folding cranes for trucks have a power/weight ratio among the best in the market and a lifting capacity from 2 txm to 300 txm.
  • Effer’s powerful hydraulic folding cranes
    March 27, 2013
    Established in 1965, Effer says its wide range of hydraulic folding cranes for trucks have a power/weight ratio among the best in the market and a lifting capacity from 2 txm to 300 txm.
  • BKT launches WOW campaign and introduces new tyres
    January 6, 2017
    Indian tyre manufacturer BKT got the WOW factor as it launched a number of new products. Against the backdrop of its WOW communications campaign at bauma, seen on 20 free-to-travel rickshaws and at entrances, the company said it is “reconfirming its positioning among the major players in the off-highway tyre market”. BKT product lines are now extended by new sizes and, among products it highlights, is the Earthmax, a tyre with an all-steel structure designed for dumpers and wheeled loaders to ensure optimum