Skip to main content

Swedish motorcycle test

In Sweden crash testing has been carried out using motorcycles for the first time. Four crash tests were carried out at the VTI crash laboratory in Linköping, Sweden, for the client, the insurance company Folksam. As a result, Swedish motorcyclists can expect safer barriers according to VTI, the Swedish National Road and Transport Research Insitute. The VTI have participated in two different projects with focus on better safety for motorcyclists. The first project was run in cooperation with the Swedish Mo
November 10, 2015 Read time: 2 mins
In Sweden crash testing has been carried out using motorcycles for the first time. Four crash tests were carried out at the 7264 VTI crash laboratory in Linköping, Sweden, for the client, the insurance company Folksam. As a result, Swedish motorcyclists can expect safer barriers according to VTI, the Swedish National Road and Transport Research Insitute.

The VTI have participated in two different projects with focus on better safety for motorcyclists. The first project was run in cooperation with the Swedish Motorcyclists Association (SMC) and the Swedish parapet and barrier association (SVBRF). This studied existing literature to describe state-of-the art in motorcycle to barrier crash interaction. In the second project, initiated by Folksam, four full-scale crash tests on barriers with different kinds of protection was executed.

The joint result from these two projects opened a possibility to run a final crash test with a simple prototype of a plastic cover to shield the sharp edge on the top of the barrier. According to VTI, this prototype will help reduce injuries to motorcyclists in the event of an impact. In the various tests, different kinds of motorcycle protection systems were installed on a traditional W-beam and sigma post barriers.

The cover will let the motorcyclist slide along the barrier instead of getting stuck, lowering the severity of injuries.

The positive outcome is all about covering sharp edges and protruding parts, including the posts of the barrier. The plastic tube is a cheap and simple way of demonstrating a principle but it is yet not a finished product according to VTI.
The VTI crash laboratory is an accredited test facility for the EN1317 European test procedure for barriers. Being part of the international work with the procedure research engineer at the VTI crash laboratory, Jan Wenäll, will bring this experience to the ongoing development of an additional procedure for motorcyclists addition to the same procedure.

For more information on companies in this article

Related Content

  • ERF: LCE4ROADS for sustainability during road construction
    March 28, 2017
    LCE4ROADS is a new certificate assessing sustainability during road construction and rehabilitation Statistics have just been released showing that 2016 was the hottest year in history and reinforcing the concern that climate change is starting to have a real impact on our society. Adaptation to climate change is becoming an ever growing priority for the road infrastructure sector which is looking for new ways to conduct its construction and maintenance operations in a more environmentally friendly ma
  • Dynapac planer improves racing line
    July 30, 2012
    A Dynapac PL350T cold planer helped carry out critical demarcation work on the roads used for the famous Isle of Man's TT motorcycle races. It was used to remove the road markings on the isle in the Irish Sea in readiness for the races. The Dynapac machine is equipped with a special micro milling drum which contains 117 bits, compared to the standard 38, spaced at intervals of 3mm as opposed to the conventional 12mm. In addition, to avoid a sharp edge at the sides of the demarcation area, the drum is slight
  • New developments in bitumen technology
    November 30, 2020
    From softwood in Sweden to rubber and rubble in Australia - Kristina Smith reports on new technologies which could shape tomorrow’s asphalt mixes
  • National Highways shoots for the moon
    July 5, 2023
    The Structures Moonshot project in England is focusing on bridge maintenance, in particular steel tendons in post-tensioned structures and reinforcement within concrete half-joints.