Skip to main content

Acrow lends critical support for the Cradock Bridge renovation

International bridge engineering and supply company Acrow recently installed a modular steel structure to maintain traffic flow during renovation of the historic Cradock Bridge in the US The bridge spanning the Mystic River in Medford, a suburb of Boston, Massachusetts, was built in 1637, then rebuilt in 1880 and again rehabilitated in 1934. It was determined to be structurally deficient several years ago - one of many of state-owned bridges - and was put into the state’s Accelerated Bridge Program. W
October 28, 2016 Read time: 2 mins
Acrow bridge solution for the Cradock Bridge renovation
International bridge engineering and supply company Acrow recently installed a modular steel structure to maintain traffic flow during renovation of the historic Cradock Bridge in the US

The bridge spanning the Mystic River in Medford, a suburb of Boston, Massachusetts, was built in 1637, then rebuilt in 1880 and again rehabilitated in 1934. It was determined to be structurally deficient several years ago - one of many of state-owned bridges - and was put into the state’s Accelerated Bridge Program.

Work on the stone arch bridge is to include demolition and rehabilitation of three concrete piers underneath the structure and installation of renewed stone archways, upgraded utilities, new pavement and sidewalks.

Remnants of an abandoned dam structure will be renovated to restore full flow of the river. It is anticipated that the project will be completed in November 2019.

Acrow’s two-lane detour structure is 41m at centre-line with a width of almost 9.2m.

Because two of the original bridge’s four lanes are closed during the rehabilitation, it was critical to add additional capacity to handle daily traffic in excess of 16,000 vehicles, including almost 300 public transit buses.

Acrow’s bridge solution was purchased by MassDOT for reuse after the completion of the Cradock Bridge job. Design engineer for the project is 1397 AECOM and the contractor is R. Zoppo, based in Stoughton in Massachusetts.

“The growing use of our components for planned repair and rehabilitation work proves the value of Acrow to deliver a safe product and keep state DOTs and contractors on time and on budget,” said Bill Killeen, chief executive of Acrow Bridge.

For more information on companies in this article

Related Content

  • What lies beneath Down Under
    January 11, 2021
    The third and final construction stage on Sydney’s WestConnex project has begun, including the underground Rozelle Interchange – with a lot of help from Komatsu
  • Cape Cod bridge replacements planned
    May 30, 2022
    Key Cape Cod bridge replacement projects are planned.
  • First concrete beam raised for new Mersey bridge link
    December 11, 2015
    The first concrete bridge beam for a junction on the new Mersey Gateway route has been lifted into place. Work is underway on a major road junction for the Mersey Gateway Project, with the first of 156 of the concrete beams has been lifted into place as work ramps up at a major road junction. A 550tonne capacity crane lowered the 106tonne beam into position at the Bridgewater junction in Runcorn, where the new Astmoor Bridgewater viaduct is being built over the Bridgewater canal. Two elevated slip roads ar
  • Bavarian Autobahn bridge repairs
    March 11, 2019
    Austrian contractor STRABAG is heading a consortium that will carry out bridge upgrades on the busy A9 Autobahn connecting Nuremburg with Munich in Bavaria, southern Germany. The eight bridges between the Nuremburg/Feucht interchange and the Hipoltstein junction will be demolished and replaced with new structures. The deal is worth € 38 million and will be handled by the consortium comprising STRABAG, subdivision Bavaria North, and Ed Züblin, Subdivision Bridge Construction. The client for the project is Au