Skip to main content

UK report suggests 30km Pennine tunnel with robotic maintenance

The UK could build one of Europe’s longest road tunnels as it considers route options for a new major link connecting the cities of Manchester and Sheffield in England. An interim report looking at how best to connect the cities suggested that the road could be between 40km-50km, depending on the route. It “will include a tunnelled section, which could range from between 20-30km, making it one of the longest road tunnels ever built”.
December 2, 2015 Read time: 3 mins
The Pennines, coming soon to a tunnel near you

The UK could build one of Europe’s longest road tunnels as it considers route options for a new major link connecting the cities of Manchester and Sheffield in England.

An interim report looking at how best to connect the cities suggested that the road could be between 40km-50km, depending on the route. It “will include a tunnelled section, which could range from between 20-30km, making it one of the longest road tunnels ever built”.

The report also suggested robotic equipment be considered for routine inspections and maintenance tasks, such as tunnel cleaning and waste. “Robotic traffic management will also eliminate the dangers inherent in current systems of traffic management for large-scale maintenance schemes.”
 
Geology of the Pennines is generally suitable for construction of bored tunnels, said the report. “Our preliminary analysis suggests that the cross section through the tunnel will be dual carriageway and we need to have a minimum of two lanes in each direction.” But “the diameter of tunnel bores would be limited to around 15m using present-day tunnel boring machines”.
 
Tunnel design could be effected by the shift from oil-derived combustion to electric, hydrogen and other fuel sources that could reduce the need for ventilation shafts to remove exhaust fumes. The tunnel would need to incorporate low-maintenance systems and products to minimise the frequency of operations and to eliminate unnecessary or hazardous activities.

Even so, it is early days yet for detailed design considerations, according to the Trans-Pennine Tunnel Study Interim Report, published by a Mouchel-Hyder joint venture.
 
In July, 8100 Highways England awarded a €1.85 million contract to Mouchel and Hyder to complete a study for the route which is part of the government’s €21 billion long-term Roads Investment Strategy announced in December last year.

The report is investigating the strategic and economic case for a new high-standard highway route between Manchester and Sheffield, including assessing the potential opportunities of combining with a rail or light rail link. It is anticipated that the new route will cross the Pennines and the Peak District National Park, an extremely environmentally sensitive area.

“We are at too early a stage in the design of the potential scheme to present robust analysis on any of the economic costs and benefits of a scheme,” the report noted. Potential significant benefits include reductions in travel time of up to 30 minutes for both passenger and freight traffic between Manchester and Sheffield.

The current journey between Manchester and Sheffield over Pennine routes is around 72km and takes an average of 85 minutes. The same journey is 120km by the M62 motorway and takes 95 minutes.

Reduced travel over the Pennines could have positive impacts on the environment, according to the study.

“The means by which this new strategic route will be funded have not yet been considered. One option might be to introduce road-user tolls, but this would have an impact on the economic case for the scheme. The effects of tolling will be considered in later stages of the study, although a decision on whether or not to toll the road is outside the scope of the current study.”

Mouchel-Hyder said a final report would be published by October 2016.
 
The interim report is available by %$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal clicking here Pennine Tunnel false http://www.gov.uk/government/uploads/system/uploads/attachment_data/file/480668/trans-pennine-tunnel-interim-report.pdf false false%>.

For more information on companies in this article

Related Content

  • INTERMAT launch for Doosan DX180LC-3
    April 11, 2012
    The DX180LC-3 is the first of Doosan’s mid-range stage IIIB compliant excavators. Powered by a Doosan DL06 common rail six-cylinder turbocharged diesel engine, this 18tonne excavator uses a combination of EGR and DPF to meet emissions legislation. As a result, the new engine offers more power and torque than the stage IIIA DX180LC, and the potential to save 5-10% fuel consumption. A new cab offers greater room for the operator, while more glass helps visibility. Joysticks now feature new proportional thumb
  • Power meets control with Case’s new dozers
    January 6, 2017
    Case says its three new M Series dozers being introduced at bauma – the 1150M, 1650M and 2050M – offer a 10.5% fuel saving, and 19% increase in productivity, compared to the previous generation of machines, due to their claimed best-in-class engine reaction. With operating weights from 13-20tonnes and like other M Series models, the three new dozers are powered by fuel-efficient, Tier 4 Interim FPT engines, using a proven Selective Catalytic Reduction (SCR) technology. The 1150M and 2050M with their new SCR
  • Power meets control with Case’s new dozers
    February 7, 2013
    Case says its three new M Series dozers being introduced at bauma – the 1150M, 1650M and 2050M – offer a 10.5% fuel saving, and 19% increase in productivity, compared to the previous generation of machines, due to their claimed best-in-class engine reaction. With operating weights from 13-20tonnes and like other M Series models, the three new dozers are powered by fuel-efficient, Tier 4 Interim FPT engines, using a proven Selective Catalytic Reduction (SCR) technology. The 1150M and 2050M with their new SCR
  • Dynapac introduces new compaction equipment
    January 6, 2017
    Focussing on advanced compaction and paving equipment, Atlas Copco Road Construction Equipment Division highlights a number of new products “We have been working hard and determent, listening carefully to our customer’s needs and present a great range of new and updated products.” says Herman Matthyssen, vice president marketing west. “Up-time, ergonomics, reliability and serviceability are key success factors nowadays."