Skip to main content

SDS develops SuDS material to tackle highway metals pollution

SDS says that its engineered treatment media Aqua-Xchange can be used in regulatory-compliant sustainable drainage systems - SuDS. Delivered to site in lightweight 1m³ bags, it can be deployed as stormwater treatment in highways drainage, as well as on other higher risk locations such as retail car parks, freight and logistics hubs. SDS claims that independent tests have shown its Aqua-Xchange removes 99% of dissolved copper and zinc, toxic metals identified by Highways England as priority pollutants
November 30, 2018 Read time: 3 mins
SDS’s Aqua-Xchange is a flexible and granular material that captures copper and zinc in surface water runoff from motorways, trunk roads and other high-traffic areas
SDS says that its engineered treatment media Aqua-Xchange can be used in regulatory-compliant sustainable drainage systems - SuDS.


Delivered to site in lightweight 1m³ bags, it can be deployed as stormwater treatment in highways drainage, as well as on other higher risk locations such as retail car parks, freight and logistics hubs.

SDS claims that independent tests have shown its Aqua-Xchange removes 99% of dissolved copper and zinc, toxic metals identified by Highways England as priority pollutants and subject to strict regulatory controls.

Aqua-Xchange was also proven to retain these metals even when applications of road salt were simulated.

It works through a combination of naturally-occurring materials that use adsorption and ionic exchange to form unbreakable bonds with the heavy metals. It captures and retains them even in heavy storms.
 
The result is “an affordable and truly versatile new SuDS material that can be used in both existing and new drainage schemes”, according to Jo Bradley, SDS market development manager and who led the development project.

Aqua-XchangeTM has a large active surface area, enabling high-performance pollutant removal in a small space. As a result, it can be used to deliver pre-treatment as part of a vegetative SuDS scheme, enabling smaller SuDS ponds or wetlands to be designed where otherwise there would have been no room for them.

In a typical application, a layer of SDS Aqua-Xchange can be added as an additional component to a linear filter drain and can be installed at a shallow depth which avoids costly excavation and use of heavy cranes.

The SDS Aqua-Xchange can also be combined with other proprietary SuDS devices. As it can filter out finer silts and sediments, it can be deployed downstream of a hydrodynamic vortex separator such as SDS’s Aqua-Swirl that targets larger particles. It can also be combined with geo-cellular storage, such as SDS’s GEOlight, when additional attenuation is needed as part of a  roadside treatment system.

Aqua-Xchange can be included as a component in vegetative SuDS devices such as dry swales, raingardens or bio-remediation zones, so that robust retention of copper and zinc is completely assured while plants can continue to thrive as part of the landscaped design.

The company says that the Aqua-Xchange was tested to reflect a range of rainfall conditions under the observation of an independent representative from a UKAS-accredited laboratory in accordance with the British Water protocol.

Related Content

  • Europe’s traffic pollution problem causes concern
    December 3, 2012
    The latest data available suggests that traffic pollution is still harmful to health in many parts of Europe. Transport in Europe is responsible for damaging levels of air pollutants and a quarter of EU greenhouse gas emissions. Many of the resulting environmental problems can be addressed by stepping up efforts to meet new EU targets, according to the latest report from the European Environment Agency (EEA). The EEA’s annual report under the Transport and Environment Reporting Mechanism (TERM) assesses the
  • Aggregate data aids hot mix asphalt production
    July 4, 2012
    Hot-mix asphalt (HMA) is produced at specialised facilities where various mixtures of aggregate are heated and dried, combined with liquid asphalt cement (also known as bitumen), and either stored in insulated silos or loaded into trucks and transported to a job site. Aggregate heating and drying is accomplished with various types of dryers, depending on whether a batch or continuous process is used. The continuous mix process uses aggregate drum dryers, designed to heat and dry measured quantities of grave
  • Kind of blue on emissions
    September 25, 2023
    Cleaner asphalt production will reduce blue smoke emissions.
  • Upright performance from the RW 500 wheel saw from Simex
    April 26, 2018
    Simex has continued with design refinements of the RW 500 wheel saw with the introduction of the RWA 500. The RWA 500 operates constantly perpendicular to the surface, even when the prime mover, a skidsteer wheeled loader, is at a slant. The RWA 500’s high productivity is a result of hydraulic piston motors in direct drive with the milling disk, which delivers maximum efficiency and a large cutting force. Operators are assured good visibility because the excavation depth corresponds exactly and