Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • VIDEO: Flux Capacitor takes off on an electrifying winning ride
    July 25, 2016
    Blue smoke belches from spinning tyres as possibly the world’s fastest street-legal electric vehicle takes off down the track at Santa Pod Raceway in the UK. Sports journalist and commentator Jonny Smith pushed his bright orange Flux Capacitor, a reworked electric Enfield 8000 from the 1970s, to a sub-10 second quarter mile - 9.86 seconds to reach 121.73mph. Not bad for a car designed with a top speed of 40mph in mind. The noise in the video is from the petrol-engine car that struggled to keep up.
  • LiuGong to reveal new excavators at INTERMAT
    January 6, 2017
    LiuGong Machinery is using Intermat 2012 to unveil its next generation excavator range. The new E Series excavators represent a leapfrog improvement for LiuGong, meeting world-class standards of quality and design.
  • LiuGong to reveal new excavators at INTERMAT
    March 7, 2012
    LiuGong Machinery is using Intermat 2012 to unveil its next generation excavator range. The new E Series excavators represent a leapfrog improvement for LiuGong, meeting world-class standards of quality and design.
  • XCMG in acquisition mode
    January 6, 2017
    XCMG is believed to be in advanced negotiations over the purchase of major concrete machinery manufacturer Schwing as part of its ambitious plans to break into the top three companies for construction machine sales by 2015. One company source said the acquisition of Germany-based Schwing would be a “big thing” for the global construction machinery industry. “We feel they can contribute to our competitiveness in the concrete machinery sector. Our lower manufacturing costs and their high level technology make