Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • Link-Belt unveils the next generation of its RTC-80110 Series II large rough terrain crane series
    March 27, 2013
    merican crane builder Link-Belt will be showing off the latest in its line of mid-range rough terrain cranes at Bauma, the RTC-8080 Series II, which offers a fully-powered, four-section, 38.7 m (127 ft) long main boom. The RTC-8080 Series II has a two-mode telescope proportioning system known as A-max and three on-board fly options allow operators to use at least four manual offset positions fixed at 2, 15, 30, and 45 degrees. One of the three on-board fly offerings is a 3-piece, bi-fold lattice fly, which
  • Skako Concrete unveils its Rotoconix mixer
    January 6, 2017
    Skako Concrete has – literally – unveiled its new Rotoconix mixer after keeping the new model under cover until 11am on the first day of bauma. The Rotoconix is designed for quick batching cycles, fast discharge and uniform mixing no matter the batch size. The mixer has three key parts, all of which are reversible. It combines a rotating cone a high-speed ‘turbo whirler’ and a screw.
  • Skako Concrete unveils its Rotoconix mixer
    April 15, 2013
    Skako Concrete has – literally – unveiled its new Rotoconix mixer after keeping the new model under cover until 11am on the first day of bauma. The Rotoconix is designed for quick batching cycles, fast discharge and uniform mixing no matter the batch size. The mixer has three key parts, all of which are reversible. It combines a rotating cone a high-speed ‘turbo whirler’ and a screw.
  • Caterpillar loads up a golf course and takes it for a spin
    July 13, 2015
    Caterpillar’s recent advertising campaign lends new meaning to the term ‘driving range’. The construction equipment manufacturer loaded several heavy mining and dump trucks with soil and created a moving golf course, complete with greens and even a small waterfall. The company then had two golfers attempt to hit the “greens” as the trucks, including a 928 wheel load, drove around within driving distance of the professionals. Click here to see not just how well the golfers did underneath a clear blu