Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • PERI unveils VARIOKIT heavy-duty truss girder
    April 18, 2013
    PERI says that with new VARIOKIT system components it is now possible to create a heavy-duty truss girder for bridge construction. A supplement to the VARIOKIT heavy-duty shoring tower launched at bauma 2010, PERI said that during the new truss girder solution’s development it took into account load-bearing capacity of the tower and the challenging requirements of daily construction work. The modular lattice system can be used for spans up to 40m and is said by PERI to have a very high-load bearing capacity
  • Scanclimber’s three-mendous hoist
    January 6, 2017
    Scanclimber claims to have developed the world’s first callable multipurpose hoist. Triple Hoist, being exhibited by the Finnish firm at Intermat, is said to be lightweight and deployable in three different ways – as a material hoist; a transport platform; or as a personnel hoist. Scanclimber says Triple Hoist has been specifically designed for smaller building projects, making them ideal for rental and scaffolding companies. Because of its multipurpose use, fast installation and value price, Scanclimber cl
  • Scanclimber’s three-mendous hoist
    April 12, 2012
    Scanclimber claims to have developed the world’s first callable multipurpose hoist. Triple Hoist, being exhibited by the Finnish firm at Intermat, is said to be lightweight and deployable in three different ways – as a material hoist; a transport platform; or as a personnel hoist. Scanclimber says Triple Hoist has been specifically designed for smaller building projects, making them ideal for rental and scaffolding companies. Because of its multipurpose use, fast installation and value price, Scanclimber cl
  • Promove’s XP2000 completes breaker range
    January 6, 2017
    The new XP2000 breaker from Promove is designed for 22 to 29tonnes carriers and its 145mm diameter tool delivers 5900 joules of energy at between 350-650 blows per minute. A flow rate of 160litres/min at 180bar is required and the breaker can work with a backpressure of up to 25bar.