Skip to main content

Demolition starts on Seattle’s Alaska Way Viaduct

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle is underway, including the filling in of a redundant road tunnel.
June 14, 2019 Read time: 2 mins
Coming down: Demolition of Seattle’s Alaska Way Viaduct, a 1950’s structure, began this winter (pic courtesy Philip Renaud)

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle in Washington State is underway, including the filling in of a redundant road tunnel.

Demolition contractor Kiewit Infrastructure West picked up the contract estimated at around US$94 million, according to media reports. Work is expected to take up to two years and includes filling in the Alaska Way’s Battery Street Tunnel.

For each segment of the viaduct, the contractor is removing the road decks, then girders and crossbeams and finally the support columns. During demolition, barriers are installed to protect nearby buildings and water is sprayed on the work to keep down dust.

Tunnel work includes decommissioning and removing the utility and mechanical systems, removal of hazardous material from the tunnel and, when finished, the sealing of the two entrances.

Kiewit decided against using conveyor belts to move the material into the Battery Street Tunnel. Instead, rubble is trucked to a nearby sorting area where rebar is removed. The material is crushed into small piece and loaded onto side-dumping trucks that carry the debris to openings along the tunnel route that lead directly down into the tunnel itself. The trucks dump the material into a steel funnel over the openings and down it goes into the tunnel. It takes less than a minute for the material to crash down into the tunnel where it is then levelled out by workers. Vibratory rollers spread and compact the material in layers.

Prior to the demolition work, there were public petitions to keep the Battery Street Tunnel open for pedestrian and bicycle use. However, the Washington State Department of Transportation decided that the structure, in need of repair,  would have been extremely expensive to upgrade to modern seismic standards – an important feature for any structure along the west coast of the US and up into Canada. The region lies along the infamous San Andreas Fault making it prone to earthquakes.

The new Alaska Way’s tunnel lies directly under the old viaduct and was the subject of a World Highways Key Project Report in 2017.

<%$Linker:

2

External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>

 

Related Content

  • Orlaco offers advanced safety camera solution
    January 30, 2013
    Advanced camera systems for use on heavy equipment from Orlaco Products offer increased safety in construction applications. The company claims its units can be used in a wide array of duties as monitoring systems on heavy equipment, cranes, forklifts and trucks. The company says its rugged units can cope with tough duty cycles where continuous vibrations and temperature fluctuations are common, adding that its visibility solutions meet all high quality requirements. In addition, the firm offers its innovat
  • The IRF Geneva is now bringing policy & practice together
    December 12, 2013
    IRF Geneva will be capitalising on its strategic position at the heart of the city’s international community to host an unprecedented opportunity for high-level dialogue with leading road-related UN agencies and international stakeholder organisations IRF’s rich programme of global events for 2013 will conclude with a rare occasion for both members and non-members to engage directly with key officials driving policy development within the United Nations and its specialised agencies.
  • Indeco’s innovative demolition technology
    January 6, 2017
    Indeco is among the leading manufacturers of technologies for the demolition industry. An innovative system enables all the firm’s breakers to automatically vary the ratio between energy per blow and blows per minute, according to the material being demolished. Indeco HP hydraulic rock breakers range from 80kg to 7.8tonnes for excavators from 0.7tonnes to 120tonnes. The company also manufactures spare parts for hydraulic rock breakers; IFP fixed pulverisers and IRP rotating pulverisers; compactors; crusher
  • Indeco’s innovative demolition technology
    April 8, 2013
    Indeco is among the leading manufacturers of technologies for the demolition industry. An innovative system enables all the firm’s breakers to automatically vary the ratio between energy per blow and blows per minute, according to the material being demolished. Indeco HP hydraulic rock breakers range from 80kg to 7.8tonnes for excavators from 0.7tonnes to 120tonnes. The company also manufactures spare parts for hydraulic rock breakers; IFP fixed pulverisers and IRP rotating pulverisers; compactors; crusher