Skip to main content

Engineering elegance in bridge design

Multi-award-winning bridge designer Michel Virlogeux was the keynote speaker at the recent Austroads Bridge conference, held in Auckland, New Zealand, last month. He had a simple message: Bridge design is the realm of the engineer and should not be given to architects. "Bridge architecture, bridge aesthetics, bridge elegance is the problem of engineers. We must not leave this major part of our job to architects," he said. "I always work with an architect, but the architect is not selecting the structure. To
July 9, 2012 Read time: 4 mins
Virlogeux said that the award winning Millau Bridge in France is a good example of an iconic structure that features sound engineering principles and was not extremely costly to build

Bridge designer Michel Virlogeux interviewed by Mary Searle

Multi-award-winning bridge designer Michel Virlogeux was the keynote speaker at the recent Austroads Bridge conference, held in Auckland, New Zealand, last month. He had a simple message: Bridge design is the realm of the engineer and should not be given to architects.

"Bridge architecture, bridge aesthetics, bridge elegance is the problem of engineers. We must not leave this major part of our job to architects," he said. "I always work with an architect, but the architect is not selecting the structure. To design a bridge is to master forces, and this is not the job of the architect."

This does not leave architects out of the bridge design game altogether, however, Virlogeux himself frequently works with architects, saying they can bring a lot to a project. "I've been designing bridges for 35 years now and I can foresee very well which type of structure is most adapted to the site. I have a very good idea of proportions - where to place the piers and so on - I don't need help for that. But then later, when we have a good idea of what we can do, I consider that I am not able to refine the shapes. And there the architect is much better than I am.
"If I take the example of the Millau Viaduct, Foster, after looking at the models we had first prepared, he wanted to reduce the bridge to the essence - just the straight line, which was also my idea from the beginning. But he pushed to take out the small piers and the side span that we had in the beginning. It made the technical problem more difficult, but the bridge was reduced to just the straight line and the seven identical towers. Myself also, I wanted identical towers, but I could have left, probably, the small piers at the end. Really, he improved the design of the bridge very much."

Virlogeux says trouble begins when architects try to do the job of the engineer, "To organise the flow of forces, it's not the problem of an architect, it's the problem of an engineer. And the engineer masters the construction techniques, the flow of forces, how to connect elements, not the architect. So it's absolutely crazy to give bridge designs to architects." He gave the example of the Alamillo Bridge in Seville, Spain, designed by award-winning architect Santiago Calatrava. "It's a very expensive structure because it has absolutely no structural logic. You have just one single span, cable-stayed from a tower that is inclined backwards but there is no backstay at all, so that means that the tower has to take all the effect of the load - the weight takes a very small part of it - and you have, of course, below that, an enormous foundation to balance the load."

So why is bridge design being given to architects instead of engineers? "It comes from the fact that engineers have not done their job properly. Too many have designed things that are not beautiful. Also because they are too concerned with codes - yes, we need codes, but we must not be the slaves of codes," said Virlogeux.

"Of course, if engineers produce bridges like this the public will call for architects. The architects will build something absolutely crazy, which is a completely different way of making things wrong."

This problem is compounded by the decisions of bridge authorities to build 'iconic' bridges. Virlogeux said, "When you have to build a bridge somewhere you have to make a bridge that is fitted to the need and the site of the landscape. And if you are successful it will be a good bridge. Maybe it will be iconic, maybe not. But really this tendency to make things that are 'signature' or 'iconic' is really the desire to show off, which is absolutely stupid."

However another big problem engineers have, said Virlogeux, is that it is extremely difficult to convince the politicians and the public at the beginning of the benefits of a simple bridge. "I think it is necessary to take a medium road. We can design elegant bridges with reasonable costs. Between the cheapest solution and Millau there is probably 10-15% cost increase - not three times the cost. And when you make a crazy design it could be three, four, five times the cost." "The cost to take functional to elegant could be perhaps as low as 1% of the cost. This is what we can do very easily."

Related Content

  • Machine control technology allows more efficient paving
    March 3, 2015
    In the US, a specialist contractor is making savings with new 3D technology for concrete paving. US contractor Gehring Construction is a specialist in concrete paving and is a long-time customer of GOMACO. Having bought its first GOMACO unit in 1973, Gehring has a good deal of experience in this segment. The company is now using some of the latest machine control technology, having bought a Topcon Millimetre GPS 3D stringless system, which has been used on a bypass project around the US city of Colombus. T
  • A history lesson in private public partnerships
    April 12, 2012
    Michel Démarre gives some historical insights into public-private partnerships conceived to implement urban infrastructure projects, a concept that surprisingly dates back to as early as the 13th century! All over the world today, the role of public authorities in the process of planning and, in most cases, designing, financing and procuring urban roads is paramount. Even for modifications to existing roads, decisions are made by these public authorities (usually after due consultation with the population)
  • Researchers trial 3D printing for both concrete and asphalt roads
    February 27, 2019
    Automated road repairs, using 3D printing, could save money and vastly reduce disruption, and researchers are already showing it’s possible - Kristina Smith reports It’s the middle of the night, and in the street below a team is busy carrying out repairs to the road surface. But there isn’t a human in sight. A road repair drone has landed at the site of a crack and a 3D asphalt printer is now busy filling in that crack. A group of traffic cone drones have positioned themselves around the repair location
  • IRF Executives Talks: shaping the future of Intelligent transportation
    August 29, 2024
    Technological advances for the intelligent transportation sector are developing at incredible speed globally. For many leaders in the sector, one of the biggest challenges is how they should use new technology to shape the future of intelligent transportation. SWARCO chief executive, Michael Schuch, put forward his ideas in conversation with IRF Director General Susanna Zammataro ahead of the IRF World Congress in Istanbul in October.