Skip to main content

Engineering elegance in bridge design

Multi-award-winning bridge designer Michel Virlogeux was the keynote speaker at the recent Austroads Bridge conference, held in Auckland, New Zealand, last month. He had a simple message: Bridge design is the realm of the engineer and should not be given to architects. "Bridge architecture, bridge aesthetics, bridge elegance is the problem of engineers. We must not leave this major part of our job to architects," he said. "I always work with an architect, but the architect is not selecting the structure. To
July 9, 2012 Read time: 4 mins
Virlogeux said that the award winning Millau Bridge in France is a good example of an iconic structure that features sound engineering principles and was not extremely costly to build

Bridge designer Michel Virlogeux interviewed by Mary Searle

Multi-award-winning bridge designer Michel Virlogeux was the keynote speaker at the recent Austroads Bridge conference, held in Auckland, New Zealand, last month. He had a simple message: Bridge design is the realm of the engineer and should not be given to architects.

"Bridge architecture, bridge aesthetics, bridge elegance is the problem of engineers. We must not leave this major part of our job to architects," he said. "I always work with an architect, but the architect is not selecting the structure. To design a bridge is to master forces, and this is not the job of the architect."

This does not leave architects out of the bridge design game altogether, however, Virlogeux himself frequently works with architects, saying they can bring a lot to a project. "I've been designing bridges for 35 years now and I can foresee very well which type of structure is most adapted to the site. I have a very good idea of proportions - where to place the piers and so on - I don't need help for that. But then later, when we have a good idea of what we can do, I consider that I am not able to refine the shapes. And there the architect is much better than I am.
"If I take the example of the Millau Viaduct, Foster, after looking at the models we had first prepared, he wanted to reduce the bridge to the essence - just the straight line, which was also my idea from the beginning. But he pushed to take out the small piers and the side span that we had in the beginning. It made the technical problem more difficult, but the bridge was reduced to just the straight line and the seven identical towers. Myself also, I wanted identical towers, but I could have left, probably, the small piers at the end. Really, he improved the design of the bridge very much."

Virlogeux says trouble begins when architects try to do the job of the engineer, "To organise the flow of forces, it's not the problem of an architect, it's the problem of an engineer. And the engineer masters the construction techniques, the flow of forces, how to connect elements, not the architect. So it's absolutely crazy to give bridge designs to architects." He gave the example of the Alamillo Bridge in Seville, Spain, designed by award-winning architect Santiago Calatrava. "It's a very expensive structure because it has absolutely no structural logic. You have just one single span, cable-stayed from a tower that is inclined backwards but there is no backstay at all, so that means that the tower has to take all the effect of the load - the weight takes a very small part of it - and you have, of course, below that, an enormous foundation to balance the load."

So why is bridge design being given to architects instead of engineers? "It comes from the fact that engineers have not done their job properly. Too many have designed things that are not beautiful. Also because they are too concerned with codes - yes, we need codes, but we must not be the slaves of codes," said Virlogeux.

"Of course, if engineers produce bridges like this the public will call for architects. The architects will build something absolutely crazy, which is a completely different way of making things wrong."

This problem is compounded by the decisions of bridge authorities to build 'iconic' bridges. Virlogeux said, "When you have to build a bridge somewhere you have to make a bridge that is fitted to the need and the site of the landscape. And if you are successful it will be a good bridge. Maybe it will be iconic, maybe not. But really this tendency to make things that are 'signature' or 'iconic' is really the desire to show off, which is absolutely stupid."

However another big problem engineers have, said Virlogeux, is that it is extremely difficult to convince the politicians and the public at the beginning of the benefits of a simple bridge. "I think it is necessary to take a medium road. We can design elegant bridges with reasonable costs. Between the cheapest solution and Millau there is probably 10-15% cost increase - not three times the cost. And when you make a crazy design it could be three, four, five times the cost." "The cost to take functional to elegant could be perhaps as low as 1% of the cost. This is what we can do very easily."

Related Content

  • Concrete paving technology offers long term roadway construction
    July 18, 2012
    Concrete slipforming technology offers long term roadway and barrier construction with new technology now available - Mike Woof reports With road construction investment being seen around the world, concrete slipformer manufacturers are seeing strong export sales at present. New models are coming to market also with manufacturers continuing to broaden ranges by offering additional features and capabilities. US concrete paving specialist GOMACO is benefiting from extensive worldwide sales, with its long term
  • Asphalt milling optimised by 3D controls
    February 20, 2012
    3D machine controls can optimise milling efficiency, Mike Woof reports. More efficient milling and recycling operations can be carried out by using the latest 3D control systems on the market. At the last Trimble Dimensions event in Las Vegas, the advantages of 3D controls for milling operations proved a key topic. The use of 3D control systems can offer huge advantages in milling operations. This technology helps increase productivity as the milling machine will only remove what is required, which also hel
  • Slow down for road safety says FIA
    September 19, 2018
    Driving too fast is a leading cause of road fatalities, according to the Fédération Internationale de l’Automobile (FIA) Region I. Data from the FIA says that an estimated 40%-50% of people drive over the speed limit while a 5% reduction in average speed could result in a 30% decrease in number of fatal crashes. FIA Region I and its members in Europe, the Middle East and Africa are launching a campaign ‘Slowing Down Saves Lives’ and are urging drivers to respect speed limits. In support of the campaign, FI
  • Roadtec bullish with strong results
    February 21, 2017
    Roadtec says that it saw a strong financial performance in 2016 and has high hopes for 2017. Part of Astec Industries, Roadtec says that it finished 2016 exceeding its sales performance goals. The firm says that the asphalt paving market benefited from the passage of the 6-year FAST-ACT Highway Bill on December 4th, 2015. Astec Industries and Roadtec played important roles in an industry-wide campaign calling for US legislators urging them to pass the bill. “Through these efforts and many others in our i