Volvo Penta’s latest generation diesels meet low emissions targets

Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machin
March 7, 2018 Read time: 3 mins
Volvo Penta has a new range of diesels in the 5-16litre capacity range
783 Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machine. A spokesperson for the firm said, “The operator doesn’t have to do anything. It’s completely automatic.”


Each power solution features a high-performance engine with matched exhaust aftertreatment system (EATS), to comply with the next EU emissions level. The company says that its Stage V range is optimised to meet future needs and keeps the highest focus on maximised uptime and fuel efficiency, along with ease of installation, operation and maintenance. The range offers power outputs from 105-565kW.

The top-of-the-range unit is the 16litre D16 diesel, which offers a maximum power of 565kW. It is said to be a robust unit with dual-stage turbo charging which provides high power density, low fuel consumption, and a broad power band with full torque from 1000rpm. As with the D16, the D5, D8, D11 and D13 are designed to maximise uptime and ease of installation, operation and maintenance.  

Fuel efficiency is achieved with common rail fuel injection and fixed geometry turbo. Effective heat management is reached through the use of an air inlet throttle, together with uncooled exhaust gas recirculation (EGR), and the electrical exhaust pressure governor (EPG). This enables the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS.

The EATS includes: diesel oxidation catalyst (DOC); diesel particulate filter (DPF; for D5-D13 models); selective catalytic reduction (SCR); and ammonia slip catalyst (ASC).

The D5-D13 Stage V engines and EATS are designed to work together to maximise passive regeneration during normal operation. With Volvo Penta’s Stage V approach, there is no high-temperature regeneration due to the fact that sulphur regeneration in the SCR catalyst is not required; only soot regeneration is needed to clean the DPF.

These engines are also offered for use in market areas with less strict regulations on emissions. The firm says that the versions without the emissions control packages share the same footprint, making it easier for a firm to install the engines in construction machines for global use, without requiring design changes to the equipment.

For more information on companies in this article

Related Content

  • Caterpillar's latest models
    February 16, 2012
    Caterpillar has introduced the next generation of articulated trucks, with the new B Series models, which now include the 735B, offering a 32.7tonne payload; the 740B (39.5tonnes), and the 740B EJ with ejector body (38tonnes).
    Read More
  • Hatz’s American launch of 4H50TIC engine at Conexpo 2014
    January 6, 2017
    Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class. The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by
    Read More
  • Belting idea for machine
    June 21, 2012
    LBX Company’s new Link-Belt 210 X3 is said to feature an all new ROPS cab with new interior, new Interim Tier 4a engine technology and 10% better fuel efficiency. The excavator is also said by LBX to have 7% more lift capacity, 3% faster cycle times and improved serviceability. Additionally, the 210 X3 can be equipped with an optional auxiliary hydraulic system which allows the operator to change both pressure and flow settings from inside the cab without having to lift a wrench.
    Read More
  • New generation wheeled loaders from Komatsu
    January 6, 2017
    Komatsu is introducing it Dash 7 generation of wheeled loaders with a range of models including the WA320-7 and WA380-7. The new WA380-7 weighs in at 18tonnes and features improved efficiency, lower fuel consumption, improved operator comfort, and better serviceability. Power comes from an SAA6D107E-2 Komatsu diesel rated at 143kW and which meets Tier 4 Interim/Stage IIIB emission requirements. Power output and toque have been increased over the previous generation engine used in the WA380-6, while fuel con
    Read More

Highlighted Content