Volvo Penta’s latest generation diesels meet low emissions targets

Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machin
March 7, 2018 Read time: 3 mins
Volvo Penta has a new range of diesels in the 5-16litre capacity range
783 Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machine. A spokesperson for the firm said, “The operator doesn’t have to do anything. It’s completely automatic.”


Each power solution features a high-performance engine with matched exhaust aftertreatment system (EATS), to comply with the next EU emissions level. The company says that its Stage V range is optimised to meet future needs and keeps the highest focus on maximised uptime and fuel efficiency, along with ease of installation, operation and maintenance. The range offers power outputs from 105-565kW.

The top-of-the-range unit is the 16litre D16 diesel, which offers a maximum power of 565kW. It is said to be a robust unit with dual-stage turbo charging which provides high power density, low fuel consumption, and a broad power band with full torque from 1000rpm. As with the D16, the D5, D8, D11 and D13 are designed to maximise uptime and ease of installation, operation and maintenance.  

Fuel efficiency is achieved with common rail fuel injection and fixed geometry turbo. Effective heat management is reached through the use of an air inlet throttle, together with uncooled exhaust gas recirculation (EGR), and the electrical exhaust pressure governor (EPG). This enables the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS.

The EATS includes: diesel oxidation catalyst (DOC); diesel particulate filter (DPF; for D5-D13 models); selective catalytic reduction (SCR); and ammonia slip catalyst (ASC).

The D5-D13 Stage V engines and EATS are designed to work together to maximise passive regeneration during normal operation. With Volvo Penta’s Stage V approach, there is no high-temperature regeneration due to the fact that sulphur regeneration in the SCR catalyst is not required; only soot regeneration is needed to clean the DPF.

These engines are also offered for use in market areas with less strict regulations on emissions. The firm says that the versions without the emissions control packages share the same footprint, making it easier for a firm to install the engines in construction machines for global use, without requiring design changes to the equipment.

For more information on companies in this article

Related Content

  • Debut for Liebherr A 914 Litronic wheeled excavator
    April 9, 2018
    Liebherr’s Stage IV/Tier 4 emission standards-compliant A 914 Litronic wheeled excavator, at a trade show for the first time, has an operating weight of between 14.9-17.2tonnes. Powered by a Liebherr D924 diesel engine, producing 105kW, the SCR system, which consists of an SCR catalyst system and other components such as an injector and AdBlue solution, is said to bring about a 91% reduction in nitrogen oxide (NOX). A particulate filter is not required but can be installed as an addition for special
    Read More
  • Doosan excavators key to Germany B 2 highway upgrade
    April 2, 2014
    Thannhauser + Ulbricht Straßen- und Tiefbau (TU) is employing four new Doosan DA30 articulated dump trucks (ADTs) and a new Doosan DX490LC-3 crawler excavator for the earthmoving work during the upgrade of Germany’s B2 federal highway. The machines being used by TU, based in Fremdingen, southern Germany, belong to the rental fleet of Rühle Maschinenpark from Untermünkheim-Haagen.
    Read More
  • Volvo’s B-Series compactors roll with the punches
    March 2, 2016
    Volvo Construction Equipment has introducing the new B-Series Stage IV/ Tier 4 Final-compliant soil compactors. The SD75B, SD115B and SD135B soil compactors have Volvo’s advanced drum control system that allows the operator – via an easy-to-use console – to adjust the frequency and amplitude, compensating for changing soil types and conditions. Two frequency settings come as standard but five can be included as an option. High or low amplitude can be selected to adjust the drum’s dynamic force based on t
    Read More
  • Volvo’s B-Series compactors roll with the punches
    January 6, 2017
    Volvo Construction Equipment has introducing the new B-Series Stage IV/ Tier 4 Final-compliant soil compactors. The SD75B, SD115B and SD135B soil compactors have Volvo’s advanced drum control system that allows the operator – via an easy-to-use console – to adjust the frequency and amplitude, compensating for changing soil types and conditions. Two frequency settings come as standard but five can be included as an option. High or low amplitude can be selected to adjust the drum’s dynamic force based on t
    Read More

Highlighted Content