Skip to main content

Italy’s horrific bridge collapse is a sign of a wider problem

The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished. However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays
January 7, 2019 Read time: 3 mins
The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished.


However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays, had been subject to frequent maintenance periods in the past. Two years ago a professor of engineering from Genoa University voiced concern over the condition of the Morandi Bridge. It is worth noting that the Wadi el Kuf Bridge in Libya by the same designer, Riccardo Morandi, has a similar arrangement of supports and cable stays. The Libyan bridge, first opened in 1972, was closed due to structural problems in 2017.

Questions have been asked as to why so many structures in Italy, particularly in the south, are suffering so badly from age. The quality of materials used during construction have been highly suspect in some instances, with organised crime linked to the poor engineering performance of many structures. Italy has seen 12 bridge collapses in recent years, four of which occurred in the south of the country.

Not since the collapse of the I-35 West bridge in Minneapolis in 2007 has there been such a public bridge disaster in a western developed nation. The I-35 W disaster in the US sparked examinations of other structures, showing some 20-25% of US bridges to be structurally deficient.

And nor is the problem restricted to Italy or the US. France, Germany and the UK for example all have their share of ageing bridges. It is a sign of the times, as structures erected in the 50s, 60s and 70s succumb to wear and tear. In many instances the wear can also be attributed to factors that were not properly understood at the time of design construction, such as the risk of long-term corrosion of unprotected reinforcing steel caused by chloride attack.

Bear in mind too that highways and bridges built in the 1960s were designed to handle far lower traffic volumes. For example, the UK’s Forth Road Bridge carried around 4 million vehicles/year after it was opened in 1964 and was designed to handle up to 11 million vehicles/year. However, by the time it was replaced by the new Queensferry Crossing, around 24 million vehicles/year were using the link. This is only part of the picture. Trucks had GVWs of just 20tonnes or so in the 1960s, compared with a maximum permitted weight of 44tonnes now in Europe, while a far higher percentage of freight is now carried by road. Given that stress levels increase exponentially with weight, using a rough calculation it can be assumed that the Forth Road Bridge was handling something like 16 times the daily stresses it had been designed for. No small wonder then that it wore out.

It would be naïve indeed to assume that crumbling transport infrastructure is solely an Italian problem stemming from ‘Mafia concrete’.

Related Content

  • Bentley Systems annual infrastructure awards
    October 25, 2019
    The annual Year in Infrastructure Awards 2019 run by software specialist Bentley Systems saw a record number of entries, with 571 submissions from 60 countries. Competition was tough, with three finalists being selected by panels of expert judges for the wide range of entry categories.
  • Bitumen technology: from potholes to PMB plants
    November 21, 2014
    This month we look at how warm mix is helping to pave dirt roads, a new way to tackle potholes, and bring news of a new distribution centre for the UK - Kristina Smith reports The creation of a new mix design, incorporating MWV’s warm mix additive Evotherm, is providing cost-effective solutions for dirt roads in the US’s Charleston County. The first stretch to be paved with the new porous paving in April this year, Joseph White Road in the town of Adams Run, resulted in the estimated US$1.1 million construc
  • The US needs bridge repairs
    February 15, 2022
    The US needs many of its bridges to be repaired.
  • Weigh in motion systems aid overweight vehicle detection
    July 12, 2012
    Modern weighing equipment helps road operators tackle the costly business of road damage caused by overloaded trucks as Patrick Smith reports. Overloading of commercial vehicles has a major impact on the life expectancy of road networks. The cost of premature road failure and repairs is a major burden on many governments particularly in developing countries where this problem diverts vital funding that could otherwise be spent on health and education.