Skip to main content

Italy’s horrific bridge collapse is a sign of a wider problem

The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished. However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays
January 7, 2019 Read time: 3 mins
The shocking collapse of a major highway bridge in the Italian city of Genoa has highlighted a major problem with regard to poor infrastructure condition in the country. Causing multiple fatalities, the cable-stayed Morandi Bridge suffered a spectacular failure of a central support. Homes have had to be evacuated and it seems likely that the bridge, opened in 1967, will now have to be demolished.


However, warnings had been given. The unusual bridge design, with its thin deck and reinforced concrete stays, had been subject to frequent maintenance periods in the past. Two years ago a professor of engineering from Genoa University voiced concern over the condition of the Morandi Bridge. It is worth noting that the Wadi el Kuf Bridge in Libya by the same designer, Riccardo Morandi, has a similar arrangement of supports and cable stays. The Libyan bridge, first opened in 1972, was closed due to structural problems in 2017.

Questions have been asked as to why so many structures in Italy, particularly in the south, are suffering so badly from age. The quality of materials used during construction have been highly suspect in some instances, with organised crime linked to the poor engineering performance of many structures. Italy has seen 12 bridge collapses in recent years, four of which occurred in the south of the country.

Not since the collapse of the I-35 West bridge in Minneapolis in 2007 has there been such a public bridge disaster in a western developed nation. The I-35 W disaster in the US sparked examinations of other structures, showing some 20-25% of US bridges to be structurally deficient.

And nor is the problem restricted to Italy or the US. France, Germany and the UK for example all have their share of ageing bridges. It is a sign of the times, as structures erected in the 50s, 60s and 70s succumb to wear and tear. In many instances the wear can also be attributed to factors that were not properly understood at the time of design construction, such as the risk of long-term corrosion of unprotected reinforcing steel caused by chloride attack.

Bear in mind too that highways and bridges built in the 1960s were designed to handle far lower traffic volumes. For example, the UK’s Forth Road Bridge carried around 4 million vehicles/year after it was opened in 1964 and was designed to handle up to 11 million vehicles/year. However, by the time it was replaced by the new Queensferry Crossing, around 24 million vehicles/year were using the link. This is only part of the picture. Trucks had GVWs of just 20tonnes or so in the 1960s, compared with a maximum permitted weight of 44tonnes now in Europe, while a far higher percentage of freight is now carried by road. Given that stress levels increase exponentially with weight, using a rough calculation it can be assumed that the Forth Road Bridge was handling something like 16 times the daily stresses it had been designed for. No small wonder then that it wore out.

It would be naïve indeed to assume that crumbling transport infrastructure is solely an Italian problem stemming from ‘Mafia concrete’.

Related Content

  • Climate change is damaging roads
    August 16, 2018
    With 2018 well under way, the ravages of extreme weather in recent months is now sadly apparent on the road network in many countries, and even on many continents. In East Africa, heavy rains have overwhelmed storm drains in many areas, with flood waters washing away vehicles and damaging road surfaces in urban and rural areas alike. Road repairs are now having to be carried out in Kenya, Rwanda, Tanzania and Uganda to patch up surfaces that have been washed away, along with the replacement of signage and
  • Polyfunctional Polymeric Systems (PPS) help stressed roads
    May 12, 2016
    Increases in mobility and loads to which roadways are subjected has led, over the past decade, to new technologies for increasing the life of highly stressed pavements. Alongside traditional layers in asphalt concrete with normal or modified binders, there are new technologies which make it possible to produce high performance bituminous layers through the use of polyfunctional polymeric systems (PPSs).
  • XCMG cranes aids in key Chinese bridge construction
    June 10, 2015
    Work to construct a key bridge in China has been aided by a crane supplied by XCMG The crane was used to erect 100m high twin bridge supports for the structure. The bridge is a dual-cable, pre-stressed concrete cable-stayed bridge featuring two towers. The bridge is located in Shandong and was recently opened to traffic. The project was not without its challenges. Building such a large bridge spanning the Yi River required sophisticated methodologies and use of the latest technology. Mounting the cab
  • Australian bridge slides into position
    July 18, 2012
    A heavy rail crossing as part of Australia's EastLink motorway demanded great ingenuity and careful planning Most of the 88 bridges on the EastLink tolled motorway in, Melbourne, Australia were kept as simple and straightforward as possible. Contractor Thiess John Holland (TJH) developed its own precast yard 150km from the city, which provided many of the prefabricated materials required for the structures. This offered speed and economy while logistics and sequencing were vital for their erection. But the