Skip to main content

Highway delineator system aids crash reduction

A new delineator design is said to be helping to reduce accidents on a 200mile stretch of one of the world’s most treacherous highways. Pexco LLC has produced the ‘Dalton Delineator’ for the Dalton Highway, a remote 414mile road in Alaska, reported to be the sixth most dangerous roadway in the world. The road safety system has a cantilever structure consisting of a short length of a Davidson Flexi-Guide FG 400 Roadside Delineator post mounted to a special flexible coupler.
March 21, 2012 Read time: 2 mins
The Dalton Delineator aims to reduce crashes on one of world’s most dangerous highways
A new delineator design is said to be helping to reduce accidents on a 200mile stretch of one of the world’s most treacherous highways. 301 Pexco LLC has produced the ‘Dalton Delineator’ for the Dalton Highway, a remote 414mile road in Alaska, reported to be the sixth most dangerous roadway in the world.

The road safety system has a cantilever structure consisting of a short length of a Davidson Flexi-Guide FG 400 Roadside Delineator post mounted to a special flexible coupler. The polyurethane-made coupler is attached to a square steel tube support by the roadside. The delineator post, also known as an arm, projects horizontally out from the shoulder, above the roadway. The use of white delineator arms on one side of the road and green delineator arms on the opposite side, likened by Pexco LLC to the running lights on a boat, is said to give motorists and highways maintenance workers clear indication of their position on the road, even in the midst of a blinding snowstorm.

Half of all vehicle crashes on the Dalton Highway occur during daylight hours, while a quarter take place at night when drivers are travelling on non-lighted sections of the road.

The installation of the Dalton Delineator, which began in summer 2011, comes after Alaska DOT asked Pexco LLC in early 2009 to come up with new ideas to build on the success of its existing Dalton Highway FG 400 Roadside Delineator post.

For more information on companies in this article

Related Content

  • Thin surface whitetopping for busy roads
    April 5, 2017
    In the US, considerable experience has been gained with thin white-topping (TWT), with the technique now being used in other countries as well. In the US hundreds of km of TWT is being paved every year, much of it across the mid-western states. A variation of white-topping is being used in Oregon to replace badly rutted asphalt truck lanes on primarily long uphill grades with durable, continuously reinforced concrete pavement (CRCP). Oregon has carried out several of these concrete inlay projects over the
  • Traffic Data Systems introduces its WIM-DSP 32 system
    September 15, 2015
    Traffic Data Systems has introduced its WIM-DSP 32 system - digital signal processing – specifically for use with Kistler Lineas sensors and Kistler charge amplifiers The design WIM-DSP 32 system has an integral colour graphics display and touch keys for easy configuration and functional control. WIM-DSP 32 enables a broad range of applications, from simple WIM systems for statistical purposes to sophisticated Weigh in Motion Enforcement – WIM-E – systems with monitoring and control of lane changes.
  • Dowel bar drilling selection poses challenges
    January 11, 2013
    Pneumatic concrete dowel drills have one purpose – to drill holes. While their intended use is easy to recognize, operation of this equipment isn’t quite so simple. In fact, it’s a bit of a science. That’s not to say they’re difficult to operate. But there are certain best practices and processes to keep in mind for proper drill operation, whether it’s an on-grade, slab-rider or equipment-mounted model. Operators who adopt these guidelines and implement them on every job are rewarded with better performance
  • Brazilian contractor uses novel methods for high quality road
    January 5, 2015
    Cold-in place recycling method provides fast road rebuild in Brazil In Brazil a road contractor has carried out a high quality road rebuilding job, using novel techniques. Contractor Brown Brown is located in Santa Teresinha in the state of Bahia and recently carried out a two-week job for the company to rehabilitate sections of highway BR-381. The highway is an important route in Brazil and runs from Sao Paulo to Belo Horizonte. Highway BR-381 or Rodovia Fernão Dias, as it is called, stretches some 576km