Gradall Industries’ XL 5300 III wheeled excavator exhibited at Conexpo 2014

Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014. Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN. Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces w
January 6, 2017 Read time: 2 mins
Gradall’s XL 5300 III wheeled excavator is the largest in the firm’s collection
7586 Gradall Industries largest wheeled excavator model – the XL 5300 III – is on show at Conexpo 2014.

Weighing 23.2tonnes, the XL 5300 III is said by Gradall to be designed for high productivity jobs on every terrain. With its new yellow Gradall colour scheme, the machine has a maximum reach of 10.3m and a dig depth of up to 7.5m. Its rated bucket breakout force is 113kN, and the rated boom force is 111kN.

Gradall says the XL 5300 III’s rubber tyre undercarriage will not damage concrete or asphalt surfaces while providing an exceptionally stable work platform. In fact, the wheeled excavator can work at the front, rear or either side of the undercarriage without the need to lower its optional outriggers or optional grading blade for extra stability.

Mobility is enhanced by a design utilising a full-time, 4-wheel drive transfer case that delivers power from the hydraulic drive motor to the drive axles. Both axles have wet-disc brakes.

Gradall’s telescoping, full-tilting boom on the XL 5300 III can precisely position buckets, hammers, grapples, shears and other attachments without losing power – said to be an advantage over conventional models with boom-end tilting mechanisms. A short tail swing allows the machine to work in tight spaces and along highways with minimal traffic interruption.

The operator cab offers increased comfort with sound-deadening capabilities, a large seat with built-in joysticks and a convenient switch that allows the operator to select the Gradall, Deere or SAE joystick pattern.

A host of attachments are available for the XL 5300 III, including excavating buckets, grading blades, boom extensions, and trenching buckets.

Also on show at Conexpo 2014 will be Gradall’s new XL 4100 IV hydraulic excavator.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92195 0 oLinkExternal www.GradallIndustries.com Gradall Industries web false /EasySiteWeb/GatewayLink.aspx?alId=92195 false false%>

For more information on companies in this article

Related Content

  • XCMG unveils new ADT design
    January 6, 2017
    XCMG has unveiled a novel ADT design at bauma China, the DAE60. This machine features all-wheel-drive and uses a single axle at the rear, with gear drive casings that can rotate about the ends of this axles and dual wheels for each casing. The design is said to allow good all terrain capability as the wheels can cope with very uneven ground, without losing traction. The machine has a cooling pack to the rear of the cab, with a wide but low, sloping engine cover at the front to ensure forward visibility.
    Read More
  • XCMG unveils new ADT design
    November 26, 2012
    XCMG has unveiled a novel ADT design at bauma China, the DAE60. This machine features all-wheel-drive and uses a single axle at the rear, with gear drive casings that can rotate about the ends of this axles and dual wheels for each casing. The design is said to allow good all terrain capability as the wheels can cope with very uneven ground, without losing traction. The machine has a cooling pack to the rear of the cab, with a wide but low, sloping engine cover at the front to ensure forward visibility.
    Read More
  • Hitachi unveils EH1100-5 rigid dump truck
    January 6, 2017
    Hitachi Construction Machinery has unveiled its EH1100-5 rigid dump truck, the latest version of the EH1100 RDT, at Conexpo 2014. The EH1100-5 has many successful legacy features, such as the long-life and highly compressible NeoconE/Helium suspension strut fluid, the robotically welded fully fabricated box section frame, the highly stable trailing arm front suspension, and the reliable body floating hinge pin design. Available for sale from April 2014, the EH1100-5 is said to include improvements to the
    Read More
  • Hyundai aims to be in top three of construction equipment manufacturers
    January 6, 2017
    Hyundai Heavy Industries has ambitious plans to grow from a US$3.7 billion a year business to more than $9.5 billion by 2016. At the worldwide launch of its new flagship R1200-9 (120tonne-class) excavator at INTERMAT, the company unveiled plans to expand its manufacturing facilities and said it wants to move into the top three construction equipment manufacturers. Underlining its intention of competing on a broad front in all sectors of the construction and mining equipment business, Hyundai’s introduction
    Read More

Highlighted Content