Dynapac develops drum steer compactor

The new Atlas Copco Dynapac CG2300 has steering on the drums and comes in addition to the firm’s articulated CC machines. The CG2300 is 3.99m long, 2.99m high and has an inner turning radius of only 2.65m, and an off-set as big as 1.2m. It can be operated in confined spaces and the offset allows it to operate close to kerbs or highway barriers. The CG2300 machine has an ECO Mode that reduces fuel consumption by over 15% and that also helps to lowers operating noise. Working noise is further reduced by a hy
March 2, 2016 Read time: 1 min
Dynapac develops new drum steer compactor
The new 161 Atlas Copco 206 Dynapac CG2300 has steering on the drums and comes in addition to the firm’s articulated CC machines. The CG2300 is 3.99m long, 2.99m high and has an inner turning radius of only 2.65m, and an off-set as big as 1.2m. It can be operated in confined spaces and the offset allows it to operate close to kerbs or highway barriers.

The CG2300 machine has an ECO Mode that reduces fuel consumption by over 15% and that also helps to lowers operating noise. Working noise is further reduced by a hydraulic, temperature-guided cooling fan. A double pump vibration system makes the system more efficient, aiding servicing and also further lowering fuel consumption.

For more information on companies in this article

Related Content

  • Dynapac planer improves racing line
    July 30, 2012
    A Dynapac PL350T cold planer helped carry out critical demarcation work on the roads used for the famous Isle of Man's TT motorcycle races. It was used to remove the road markings on the isle in the Irish Sea in readiness for the races. The Dynapac machine is equipped with a special micro milling drum which contains 117 bits, compared to the standard 38, spaced at intervals of 3mm as opposed to the conventional 12mm. In addition, to avoid a sharp edge at the sides of the demarcation area, the drum is slight
    Read More
  • Ausa’s T 144 telehandler is on the plus side
    March 15, 2016
    AUSA claims that its Taurulift T 144 H Plus is the lightest and most compact telehandler on the market. The T 144 H Plus is a light telehandler of just 2.4tonne but is well distributed between the two axles. It makes it possible to work on fragile ground or even to be transported on a trailer. Rear steering wheels facilitate loading tasks with a turning radius of less than 3m. It handles loads of up to 1,350 kg at a maximum height of 3.9m. This machine can reach horizontally 2.2m with a 550kg load and
    Read More
  • Ausa’s T 144 telehandler is on the plus side
    January 6, 2017
    AUSA claims that its Taurulift T 144 H Plus is the lightest and most compact telehandler on the market. The T 144 H Plus is a light telehandler of just 2.4tonne but is well distributed between the two axles. It makes it possible to work on fragile ground or even to be transported on a trailer. Rear steering wheels facilitate loading tasks with a turning radius of less than 3m. It handles loads of up to 1,350 kg at a maximum height of 3.9m. This machine can reach horizontally 2.2m with a 550kg load and
    Read More
  • Wirtgen W 60 Ri milling units on duty in Norway with Asfalt Remix
    July 3, 2018
    Time is money, especially in Scandinavia where the short road construction season makes efficiency and flexibility a key factor for machines. That's particularly true on small job sites, where work has to be completed quickly but reliably day after day. As soon as the job is done, machines must be quickly loaded and ready to speed off to the next project. That’s exactly what the W 60 Ri small milling machine from Wirtgen delivers. Norwegian milling service provider Asfalt Remix - which uses exclusively W
    Read More

Highlighted Content