News

The BSC 1409 D from Putzmeister is a self-propelled concrete pump designed specifically for concreting drilled piles on unfinished surfaces. In contrast to using truck-mounted concrete pumps for concreting drilled piles, it does not need supports to be set up each time it changes location. Compared to concreting with a delivery pipe, placement speed with the tracked concrete pump is now said to be considerably higher.

The principal innovation of this new version of CIFA’s SLX - super light version - series mixer is that the overall weight has been improved.

Putting his best foot forward: Nylacast marketing executive Junaid Makda shows off the company’s new Bigfoot spreader plates. Made from Nylon, which is 1.6 times stronger than polyethylene, they come in 500 to 1,220mm sizes. An anti-slip coating is applied to the top surface and the customer’s name can be etched into each pad along with a serial number and contact details.

Italian manufacturer Merlo has developed an automatic chassis levelling and stabilisation system for its ROTO range of rotating telescopic handlers. Rather than using individual controls for each stabiliser leg, the operator pushes a button to both level the chassis and stabilise the machine for heavy lifting. This greatly reduces set-up time and increases safety.

Chinese manufacturer Zoomlion will have a full range of CE-marked flat-topped tower cranes by the middle of next year. Following its buy-out of JOST’s flat top crane technology in 2011, Zoomlion is planning to market CE-marked range of 20 tower cranes. The first to market is the mid-sized T320-16, which was launched at INTERMAT. This will shortly be followed by a small-sized crane and then by the extra small crane at the end of the year, with the full range becoming available by June 2013

JCB has launched its first five-stage-boom Loadall telescopic handler. The 540-200 has a 20m working height and a maximum lift capacity of 4tonnes. Using the same driveline as the 540-170, the machine is powered by JCB’s 75kW Dieselmax engine. The Loadall has a four-speed powershift transmission and uses a single servo joystick to control all boom functions.

Zoomlion is set to grow its operations as Helen Huang, general manager for the firm’s construction hoist machinery branch explained. The firm intends capitalise on its purchase of the tower crane technology from German firm Jost. Huang said, “We have a two year licence with Jost. We purchased the whole set of topless tower crane technology. This is arranged as a two year technology transfer, although there may be the option to extend the period.”

Unic Cranes Europe has added a 10tonne lift machine to its line-up. The URW-1006 offers a 30.7m lift height and a 24.3m working radius. However, at just 2m wide, the machine remains capable of accessing restricted working areas. The spider platform has configurable outriggers to provide greater stability when lifting on uneven surfaces. The crane also uses a Wylie i4500 safe load indicator to provide lifting information to the operator on a colour LCD screen.

JLG Industries has taken the wraps off a four-model range of powershift-equipped telehandlers. The 3706PS and 3707PS have a lift capacity of 3.7tonnes with maximum reach of 6.1m and 7.3m respectively. The larger 4014PS and 4017PS models have a 4tonne lift capacity, with a maximum reach of 14 and 17.3m. All four are powered by a 75kW Stage IIIB-compliant Deutz engine, driving through a four-speed powershift transmission.

The latest XG30090 skid steer loader from Xiamen XGMA Machinery (known as XGMA) is powered by a 50.8kW Yanmar 4TNV98 engine and has Bosch Rexroth hydraulics. The CE-marked machine has a rated load of 926kg, its 0.5m3 bucket has 24kN of breakout with 30° of rollback and a maximum dump height of 2375mm. Service access is simplified with a forward tilting cab.

Palfinger Platforms has replaced its TKA series access platform with the P300KS. Mounted on a 7.5 tonne truck chassis, the P300KS has a working height of 30m with a maximum outreach to the side or the back of 20.5m. The cage, which offers 540 degrees of rotation, has a maximum load of 350kg.

Effer is extending its product range with the addition of the new 525 models. Aimed at the medium-large capacity class, the 525 models are said to offer the best power-to-weight ratio in their class. High lift capacity is claimed due to the use of new materials, which help boost structural strength. Sophisticated electronics help deliver precise operation as well as high operating speeds. According to Effer, the advanced electronics used in the Progress control package maximise working efficiency. At INTERM

Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce

Haulotte has introduced the Compact C10DX and C12DX rough terrain scissors lifts. Powered by a Stage IIIB Kubota engine, the machines produce lower noise levels and use 5% less fuel than previous models. The C10DX offers a maximum working height of 10.15m, while the larger C12DX has a 12.15m working height.