Skip to main content

Two new rough terrain cranes and a new MLC165 lattice-boom crawler crane from Manitowoc

Manitowoc will unwrap two new Grove rough-terrain cranes at Bauma: the RT550E and RT770E, as well as a new lattice-boom crawler crane. The 45tonne capacity RT550E offers the highest and longest boom in its class at 39m and, with a chassis length of just under 12m, a width of 2.55m and an operating weight of 29tonnes, the new machine is a compact crane that can run well within most national European road regulations for heavy machinery says Manitowoc. The RT550E also features the manufacturer’s new crane con
February 15, 2013 Read time: 3 mins
2123 Manitowoc will unwrap two new Grove rough-terrain cranes at 688 Bauma: the RT550E and RT770E, as well as a new lattice-boom crawler crane. The 45tonne capacity RT550E offers the highest and longest boom in its class at 39m and, with a chassis length of just under 12m, a width of 2.55m and an operating weight of 29tonnes, the new machine is a compact crane that can run well within most national European road regulations for heavy machinery says Manitowoc. The RT550E also features the manufacturer’s new crane control system, which includes a boom optimisation feature that automatically configures boom length to suit specific loads and radius. It is designed to optimise operation of the crane through a user-friendly interface, removing the need for operators to complete lengthy lift set up procedures, says Manitowoc. The RT550E’s five-section boom has the ability to telescope partial loads from between any two boom positions. It can also be fitted with an 8m fixed swing-away boom attachment to extend its reach to 47m. The hoist offers higher single line pull and increased speed, with line pull speeds that are up to 70% higher than on similar cranes in this class.

The 65tonne capacity RT770E features a lengthy 42m, five-section, full-power main boom on a compact 8m x 3.33m chassis. This gives customers extremely long reach and a five-section boom without having to upgrade to the bigger 70tonne to 80tonne crane class, where cranes are heavier on the road and take up more space on the job site, says Manitowoc. This enables the crane to fit into much tighter work spaces and eliminates the permitting needs that bigger and heavier cranes require for travel. Manitowoc argues that crane users across Europe and Africa have been asking the company to supply a rough-terrain crane in the 65tonne class that has a longer boom, and more manoeuvrability. The RT770E comes with a Cummins 6.7L engine, and has both four-wheel drive and four-wheel steering. It can be fitted with a 10.1m to 17.1m long bi-fold swing-away boom that combines with the main boom to 59.1m. The unit can extend its working radius out to 44 m.

Also look out for the new MLC165 lattice-boom crawler crane. This 165tonne capacity self-rigging crane is easy to assemble and disassemble, says Manitowoc, and it can install and remove its own counterweights and tracks without the need of a support crane. In addition, it has a 3m component width and modular assemblies for easy transport over the road and has been designed to suit the needs of contractors, bridge builders, steel erectors, and pile-driving firms. The maximum boom length of the crane is 84m and it offers an optional fixed jib and luffing jib. A new open-loop hydraulic system, served by two variable displacement piston pumps, give the 165tonne crawler more lifting power than other cranes of its class. Its maximum load moment is 762tonnemeters.

Stand: FGN.N1018/5

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.Manitowoc.com www.Manitowoc.com false http://www.manitowoc.com/ false false%>

 

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • NLMK Clabecq adds to high-yield and abrasion-resistant steel lines
    January 6, 2017
    NLMK Clabecq, the Belgian plate division of Russian steel giant NLMK Group, is benefitting from a €100m investment in its quenching and tempering operation, with the introduction of additional Quard abrasion-resistant steels and Quend high-yield strength steel plate.
  • NLMK Clabecq adds to high-yield and abrasion-resistant steel lines
    April 17, 2013
    NLMK Clabecq, the Belgian plate division of Russian steel giant NLMK Group, is benefitting from a €100m investment in its quenching and tempering operation, with the introduction of additional Quard abrasion-resistant steels and Quend high-yield strength steel plate.
  • ATS has great screen presence
    March 27, 2013
    ATS’ polyurethane wire mesh screens for industrial screenings are said to offer a wide range of advantages including long service life; easy handling; less pegging and blinding; and high screening performance with perfect undersize calibration during the screen’s working lifetime. In addition, the firm says its wire mesh screens have less sound emanating from them, while reducing the weight of the vibrating screen is said to have improved its operation. The ATS screens are equipped with hooks and fitted in
  • Scanclimber’s three-mendous hoist
    January 6, 2017
    Scanclimber claims to have developed the world’s first callable multipurpose hoist. Triple Hoist, being exhibited by the Finnish firm at Intermat, is said to be lightweight and deployable in three different ways – as a material hoist; a transport platform; or as a personnel hoist. Scanclimber says Triple Hoist has been specifically designed for smaller building projects, making them ideal for rental and scaffolding companies. Because of its multipurpose use, fast installation and value price, Scanclimber cl