Twin SCR system for Deutz V6 and V8 engines

Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.
March 6, 2014 Read time: 2 mins
Deutz TCD12 V6 diesel engine
201 Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards.

Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.

Deutz’s SCR package uses a combined DOC/SCR catalyst as the first phase of exhaust treatment, followed by a ‘clean-up’ catalyst. While slightly bulkier than a single SCR system, the dual SCR package uses one tank and two dosing systems but does not use twice as much fluid, said the company.

These latest TCD12 and TCD16 engines are said to offer up to 8% more performance with average fuel consumption reduced by around 5% compared to the previous Tier 4 interim versions. However, expect DEF consumption to increase by 2%, said Deutz.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.DeutzAmericas.com Visit Deutz Americas Website false http://www.deutzamericas.com/home.cfm false false%>

For more information on companies in this article

Related Content

  • Engine technology continues to advance, with lower emissions being one focus
    May 13, 2015
    Engine technology is advancing, with lower emissions, lower fuel consumption and longer service intervals being key developments - Mike Woof reviews some of the latest developments A huge investment in diesel engine technologies in recent years has seen manufacturers develop low emission diesels that are quieter, cleaner and use less fuel, while in many instances delivering more power. For machine manufacturers this has been a major benefit, allowing them to meet tougher regulations on noise and exhaust
    Read More
  • High performance excavators from LiuGong
    January 6, 2017
    LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
    Read More
  • High performance excavators from LiuGong
    February 8, 2013
    LiuGong is following up its introduction of its first E series excavator, the 922E, with a whole new range. The top-of-the-line model is the its 945E, which competes in the 45tonne class, features a 2.2m3 bucket and is powered by a Cummins diesel delivering 298kW. Also due are the 30tonne class 930E and 25tonne class 925E, which share similar features. The E-Series excavators are offered with the LiuGong Intelligent Power Control System (IPC), which provides more accurate matching and control over engine sp
    Read More
  • Ma-estro targets fuel theft with its new control system
    April 19, 2013
    Ma-estro, which manufactures automation and control systems for quarrying and construction sites, has launched two new products – Fuel Q-Control and Maintenance Q-Control.
    Read More

Highlighted Content