Skip to main content

Three-in-one telescopic materials-handling from Manitou

Manitou's new Privilège Plus range of all-terrain rotating telescopic trucks is designed to provide three machines in one. There are three models – the MRT 1850+, the MRT 2150+ and the MRT 2540+, with nominal capacities of up to 5tonnes and lifting heights of between 19.9m and 24.6m. Features include quick-change attachments using an automatic recognition system. The machine can be adapted to become an all-terrain telescopic truck, a crane or an access platform. The company said that the range has been des
April 16, 2013 Read time: 1 min
Manitou’s Privilège Plus range provides three machines in one
2106 Manitou's new Privilège Plus range of all-terrain rotating telescopic trucks is designed to provide three machines in one.

There are three models – the MRT 1850+, the MRT 2150+ and the MRT 2540+, with nominal capacities of up to 5tonnes and lifting heights of between 19.9m and 24.6m.

Features include quick-change attachments using an automatic recognition system. The machine can be adapted to become an all-terrain telescopic truck, a crane or an access platform.

The company said that the range has been designed to let the operator work even more efficiently and that the models are easy to operate and maintain. Stability features include modular stabilisers, leaning correctors and an automatic device for locking the oscillation of the rear axle.

Also brought to bauma were models from Manitou's MRT Easy range. The MRT 1440, MRT 1640 and MRT 1840 have lifting heights from 13.8m to 17.9m.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 47799 0 oLinkExternal www.Manitou-Group.com www.Manitou-Group.com false /EasySiteWeb/GatewayLink.aspx?alId=47799 false false%>

For more information on companies in this article

Related Content

  • On-highway regulations point to Scania off-highway emissions solution
    February 7, 2013
    Scania will be showing both Euro 6 engines for its on-highway truck range and Stage IIB/Tier 4 Final powerplants for off-highway use. The company will use both exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) to meet the coming regulations, as with its current Stage IIIB solution. This means the fitting of a diesel oxidation catalyst (DOC) but no requirement for a DPF. Scania engines are currently in use in Terex and Doosan articulated haulers, along with a number of Terex crushing ma
  • Putzmeister adds five-section pump
    January 6, 2017
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
  • Putzmeister adds five-section pump
    April 19, 2013
    Putzmeister has added a five-section 38m, 160m3/hr concrete pump, which can be used to place loads inside buildings some 3m higher than the four-section option. Built on a 26tonne chassis, the new 38.5 can reach heights of 31m while leaving the final boom section to pass inside the building. In common with the company’s other machines, the 38.5 now has outrigger sensing, which feeds into the control system and prevents the boom from extending/slewing if the outriggers are not fully deployed. The machine als
  • Improved ADTs from Caterpillar at Conexpo
    January 6, 2017
    New engines with more power, advanced transmission control, improved cabs and better serviceability are amongst the key features of Caterpillar’s new C-Series ADTs. These are the 725C, 730C, and 730C EJ ejector models, which are said to meet customer demand for increased productivity, lower operating costs, better availability, long-term durability and high resale values.