Skip to main content

Lombardini powers up the 8kW KD15-440

The Kohler/Lombardini group will use Bauma to update its range of air-cooled single cylinder diesel engines, unveiling the new 8kW KD15-440 engine which the manufacturer says will strengthen and improve the current 15LD series - elevating it to the top of the class within its power range. The KD15-440 is an air-cooled single cylinder diesel engine with a displacement of 441cc and an air filter that can offer, Lombardini claims, an operating life five times greater than the current version via its new high-e
January 6, 2017 Read time: 2 mins
Top class small engines like the 8kW KD15-440 will be on view at Lombardini
The 2278 Kohler/2277 Lombardini group will use Bauma to update its range of air-cooled single cylinder diesel engines, unveiling the new 8kW KD15-440 engine which the manufacturer says will strengthen and improve the current 15LD series - elevating it to the top of the class within its power range. The KD15-440 is an air-cooled single cylinder diesel engine with a displacement of 441cc and an air filter that can offer, Lombardini claims, an operating life five times greater than the current version via its new high-efficiency separator with pre-filter and an accumulated-dust drain valve in the filter itself. There is also a new fuel filter featuring additional pre-filter protection.

Further up the power chain, Lombardini will also show off a new line of Kohler Direct Injection (KDI) diesel engines, all of which have been prepared to meet the demands of the latest emissions regulations. This new and updated KDI series achieves clean diesel fuel combustion by using a high-pressure (2000 bar) common rail system of the latest generation, combined with an electronically triggered EGR valve that makes circulate the right amount of exhaust gases (which are liquid-cooled by a water/air heat exchanger). This, Lombardini claims, enables emission levels to comply with the new regulations while providing exceptional performance - and all without the use of after-treatment systems. There are three direct injection families, each with a different displacement rated at 1.9litres, 2.5litres, and 3.4litres, and each one is available in two different configurations: Mechanical injection to comply with Tier 3/Stage IIIA emission requirements; or common rail injection to comply with Tier 4/Stage IIIB emission requirements. The 1.9litre and the 2.5litre engines are already in production and a prototype 3.4litre unit will be on show at Bauma.

Stand: A4-402

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 48843 0 oLinkExternal www.lombardini.it Lombardini Web false /EasySiteWeb/GatewayLink.aspx?alId=48843 false false%>

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • Innovative vacuum trailer system from D-TEC
    January 30, 2013
    Netherlands-based D-TEC has developed a novel vacuum tank trailer system for applications such as bentonite extraction during sample boring. An innovative steering system is said to allow the D-TEC vacuum tanktrailer to manoeuvre easily on sites where there is little space. This design also reduces tyre scrubbing and allows greater tyre life, cutting running costs over the long term. The tank trailer offers greater load capacity than previously available designs according to the firm, due to its low weight,
  • Faresin shows upgraded telehandlers
    April 19, 2013
    Faresin Industries has expanded its telescopic handler range with the addition of the FH8.40 and the rotating Storm 22.45 evo. The FH8.40 sits in the range between the established FH7.45 and the FH9.30. The machine has a capacity of 4tonnes with a maximum lift height of 8m. Higher up the lifting scale, the Storm 22.45 rotating handler can manage up to 45tonne lifts, with a maximum height of 22m.
  • CINTASA is offering an array of advanced conveyor systems
    March 14, 2013
    Spanish specialist CINTASA is aiming its new conveyor technologies at markets including quarrying and the cement sector. The firm’s latest tripper discharger and novel TEB vertical conveyor are said to offer proven and durable solutions for heavy duty applications.
  • Anaconda is Business of the Year in Belfast
    April 19, 2013
    Anaconda Equipment, which is exhibiting its DF410 tracked screener at bauma, has been crowned Business of the Year in the Belfast Telegraph 2013 Business Awards in its home country of Northern Ireland. In making the award, the judges considered the business’s growth, export achievements and design innovations, said Anaconda marketing manager Catrina Quinn. One particular innovation relates to the transport of its machines. “All our machines can be shipped in a single container,” said Quinn. “It makes transp