Skip to main content

Lombardini powers up the 8kW KD15-440

The Kohler/Lombardini group will use Bauma to update its range of air-cooled single cylinder diesel engines, unveiling the new 8kW KD15-440 engine which the manufacturer says will strengthen and improve the current 15LD series - elevating it to the top of the class within its power range. The KD15-440 is an air-cooled single cylinder diesel engine with a displacement of 441cc and an air filter that can offer, Lombardini claims, an operating life five times greater than the current version via its new high-e
January 6, 2017 Read time: 2 mins
Top class small engines like the 8kW KD15-440 will be on view at Lombardini
The 2278 Kohler/2277 Lombardini group will use Bauma to update its range of air-cooled single cylinder diesel engines, unveiling the new 8kW KD15-440 engine which the manufacturer says will strengthen and improve the current 15LD series - elevating it to the top of the class within its power range. The KD15-440 is an air-cooled single cylinder diesel engine with a displacement of 441cc and an air filter that can offer, Lombardini claims, an operating life five times greater than the current version via its new high-efficiency separator with pre-filter and an accumulated-dust drain valve in the filter itself. There is also a new fuel filter featuring additional pre-filter protection.

Further up the power chain, Lombardini will also show off a new line of Kohler Direct Injection (KDI) diesel engines, all of which have been prepared to meet the demands of the latest emissions regulations. This new and updated KDI series achieves clean diesel fuel combustion by using a high-pressure (2000 bar) common rail system of the latest generation, combined with an electronically triggered EGR valve that makes circulate the right amount of exhaust gases (which are liquid-cooled by a water/air heat exchanger). This, Lombardini claims, enables emission levels to comply with the new regulations while providing exceptional performance - and all without the use of after-treatment systems. There are three direct injection families, each with a different displacement rated at 1.9litres, 2.5litres, and 3.4litres, and each one is available in two different configurations: Mechanical injection to comply with Tier 3/Stage IIIA emission requirements; or common rail injection to comply with Tier 4/Stage IIIB emission requirements. The 1.9litre and the 2.5litre engines are already in production and a prototype 3.4litre unit will be on show at Bauma.

Stand: A4-402

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 48843 0 oLinkExternal www.lombardini.it Lombardini Web false /EasySiteWeb/GatewayLink.aspx?alId=48843 false false%>

%$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 11560 0 oLinkInternal <span class="oLinkInternal"><span class="oLinkInternal">View more videos</span></span> Video false /event-news/bauma-2013/video/ true false%>

For more information on companies in this article

Related Content

  • Rapid International showcases its RP375 planetary mixer
    April 18, 2013
    Rapid International has been showing bauma visitors its Rapid RP375 planetary mixer, which is said to be popular with both the precast and ready-mix industries. The company also took the opportunity to unveil its new-look corporate branding.
  • Hazemag’s secondary impact crusher HSI 1414
    February 13, 2013
    HAZEMAG says it has combined two successful impact crusher series into a single one and thus increase efficiency in the secondary crushing. The new HAZEMAG HSI 1414, with a completely revised design, follows the principle of the platform strategy, which means “one housing – several options.“ “The customer may opt between different impact aprons and rotor types. Hence HAZEMAG increases the crusher’s efficiency. Within the modularly designed platform the grinding path, for example, may simply and easily (even
  • Tata Steel invests for growth
    January 6, 2017
    Tata Steel is aiming to double its worldwide steel sales by 2017 in the lifting and excavating sector from its current volume of 500,000tonnes. To achieve this target the company has recently invested €40million to improve its product portfolio, by developing its quenched and tempered, and advanced downstream processing facilities in the UK. Tata Steel said it delivers a wider range of differentiated steel products to the lifting and excavating industry than any other steel producer in the world, and provid
  • Tata Steel invests for growth
    April 18, 2013
    Tata Steel is aiming to double its worldwide steel sales by 2017 in the lifting and excavating sector from its current volume of 500,000tonnes. To achieve this target the company has recently invested €40million to improve its product portfolio, by developing its quenched and tempered, and advanced downstream processing facilities in the UK. Tata Steel said it delivers a wider range of differentiated steel products to the lifting and excavating industry than any other steel producer in the world, and provid